Description:

Features:

• 31 HP Kawasaki FX921v (999cc) engine and 14cc Parker HTG transmission
• 60” triple-7-gauge fabricated steel cutting deck with top, bottom and side reinforcements
• 3-year limited commercial warranty (no hour limitations)

Description:

Features:

• 35 HP Kawasaki FX1000v (999cc) engine and 16cc Parker HTG transmission
• 72” triple-7-gauge fabricated steel cutting deck with top, bottom and side reinforcements
• 3-year limited commercial warranty (no hour limitations)and 5 year / 1,750 hour limited deck construction warranty

Description:

The Pro-Z 972 SDL Zero Turn is simply the strongest and best commercial grade mower you can buy.

With dual rear wheels, weighted front wheels and four wheel steering the Pro-Z 972 SDL will safely mow on slopes up to 25 degrees.

Lock-in or out self-leveling air-ride seat with 30 degrees of side-to-side swivel ensures you are sitting upright and comfortable on even the steepest of slopes.

A huge 72 Inch fabricated steel cutting deck and strong 35HP Kawasaki V-Twin adds unmatched speed and productivity to the package.

The Pro-Z 972 SDL is the only choice for professional contractors who demand strength, reliability, productivity and extreme hillside mowing capability.

Features

 A powerful slope mower with 35 HP Kawasaki FX1000v (999cc) engine and 16cc Parker HTG transmission

 72” triple-7-gauge fabricated steel cutting deck with top, bottom and side reinforcements

 Lock-in or out self-leveling air-ride seat with 30 degrees of side-to-side swivel/15 degrees of travel left or right.

 Dual rear wheels and weighted front rims give this steep slope mower traction on up to a 46% grade. 12-volt outlet kit and electronic power deck lift included

 3-year limited commercial warranty (no hour limitations) and 5 year / 1,750 hour limited deck construction warranty

Specifications For Model # PRO Z 972 SDL

Engine

• Engine Brand Kawasaki®
• Engine Model FX Series
• Engine Model Number 1000V
• Engine Displacement 999cc
• Engine Output 35HP
• Starter Type Electronic
• Fuel Tank Capacity Dual 7.45 gal. US (28.2 L)
• Cylinders Twin
• Engine Start Ignition Key
• Engine Oil Capacity 2.0 qt. US (1.89 L)
• Lubrication Fully pressurized
• Charging System 15 amp regulated
• Fuel Gauge Electronic
• Choke Separate Choke
• Air Filter High Density
• Oil Filter Yes
• Fuel Delivery Carburetor

Battery

• Battery 310CCA AGM battery; Relay/Fuse terminal block; 30 AMP voltage regulator

Drive System

• Transmission Parker® heavy duty HTG 16cc pump / 310cc wheel motor with oversized wheel bearings
• Forward Speed 14 mph / 22.5 km/h
• Reverse Speed 6 mph / 9.5 km/h

Cutting Deck

• Deck Cutting Width 72 in
• Deck Material triple-7-gauge fabricated steel
• Deck Engagement (PTO) Electronic with quick reset
• Deck Construction Floating, fabricated 7 ga (0.187") steel and adjustable rear striping rollers
• Spindle Construction Maintenance-free cast aluminum housing
• Blade(s) 3 high-lift Marbain® blades / 18,500 fpm (approx.)
• Deck Lift Electro-hydraulic assist quick-lift design
• Cutting Height Range 1” to 5” in 1/4” increments
• Anti-Scalping 4 front deck gauge wheels
• Deck Positions 16

Warranty

• Deck Shell Warranty 5 year / 1,750 hour limited deck construction warranty
• Commercial Warranty 3 year / no hour limit commercial warranty

Chassis

• Frame Fully welded, 3/8" x 5" laser-cut steel
• Front Axle 2" x 3" solid with Isolation dampening system, 1/2" thick steel
• ROPS 2" x 2" foldable 3-position with low profile
• Bumper 5/16" Thick Steel rear engine guard/pre-drilled mounting points for attachments with integrated rear hitch
• Rear Tow Hitch Bolt-On hitch std.

Controls

• Cruise Control NA
• Brakes Hand-operated lever with integrated hydro pump release lever
• Steering Control Quick-adjust steering column w/ power steering
• Operator Control Low-profile throttle lever

Comfort

• Seat Type High-back air-ride suspension, EVC cushion, seat belt, angle-back adjust, lumbar support, padded armrests, isolation dampening system mounted base (lateral suspension)
• Seat Suspension side-to-side swivel/15 degrees of travel left or right
• Seat Control Swivel User-controlled lock/unlock swivel seat for operator leveling up to 30-degrees total/15-degrees left or right travel

Wheels

• Rear Tires 25"x9"-12" HD Traction Tread
• Front Tires 16"x6.5"-8" Kenda K505
• Tire Tread Heavy-Duty traction tread

Dimensions

• Dimensions L/W/H 88" / 74" / 85"
• Weight (approx.) 1,885 lbs

Additional Specifications

• Hour Meter Crew Boss
• Headlight(s) 6 LED Lights for 360 degrees of lighted visibility; Amber Beacon with three position adjustments
• Cup Holder Intergrated into Side Pod
• Model Number 53TILMUY050

Specifications

• Engine Starter Type Electric

Description:

The Cub Cadet Pro Z 560S KW features a 60-inch, fabricated deck with a Kawasaki FX Series V-Twin engine. This model features a pedal-assisted lift for the cutting deck, allowing the operator to quickly and easily adjust the deck height between sixteen different heights. Dual 7.5 gallon fuel tanks provide all-day mowing capabilities without the need to refuel often.

Features:

• 27HP/852cc Kawasaki FX850V Series V-Twin Engine
• 60-inch, 3-blade fabricated deck
• 12cc Parker HTJ series pumps and 260cc Parker motor
• Dual 7.5 gallon fuel capacity
• Ground speed: 10 mph forward/5 mph reverse
• Front wheels: 15 x 6 in - 6 in
• Rear wheels: 24 x 12 in - 12 in
• 3-year limited warranty
• Model: 53TIHJUV050

Specifications:

Warranty

• Commercial Warranty: 3 years / no hour limit

Steering

• Type: High Performance Steering Wheel & Foot-pedal Control
• Adjustment: Multi-position Quick-adjust steering column

Mower Deck

• Size/Type: 60" Fabricated Deck
• Material: 7ga. (.187”) steel shell
• Top Reinforcement: 7ga. (.187") top plate
• Bottom Reinforcement: 7ga. (.187") bottom plate
• Rolled Leading Edge: 1/4" (.250") steel
• Side Construction: 5/16" (.313) steel
• Cutting Height: 1" - 5"
• Blade-Tip Speed (Approx): 18,500 fpm
• Deck Blades: Triple-blade / High-lift blade (standard) Marbain Blade
• Trim-Side Wear Guard: 3/4" Thick UHMW-PE Replaceable
• Anti-Scalping: 2 Front HD w/ Bushings & Grease Zerk
• Spindle Covers: Steel - Tool-less Quick Release
• Discharge Chute: Heavy-duty Flex chute (impact resistant)
• Deck Height Adjustment: Foot pedal with spring assist (16 Positions)

General

• Rear Tires: 24" x 12" - 12" (Turf Tread)
• Front Tires: 13" x 6.5" - 6" (Turf Tread)
• Weight (approx): 1060 lbs
• Cup Holder: Integrated into Side Pod
• PTO Clutch: Warner Clutch - 125 ft lb
• ROPS: 2"x2" Foldable 3 Position Low Profile Clearance
• Park Brake / Braking: Hand-operated lever with integrated hydro pump release lever
• Rear Bumper: 5/16" Thick Steel rear engine guard with pre-drilled mounting points
• Seat Type: High-back dial suspension with EVC Cushion, seat belt, angle back adjust, arm rests
• Front Axle / Yokes: 2" x 3" solid axle tube and 1/2" thick steel front yokes
• Frame: Fully welded, full-length 3/8 x 5" laser cut steel with integrated tie-down slots
• Throttle/PTO/Key Switch: HD Low-profile throttle lever, sealed key switch & electronic fingertip engagement PTO
• Cruise Control: N/A
• Length / Width / Height (discharge chute up width/ ROPS up height): 80" L x 50" W x 58" H
• Safety Systems: Operator presence
• Hour Meter: Standard electronic

Engine & Drive System

• Horsepower / CC's: 27 hp - 852 cc
• Engine Type: Kawasaki FX850v
• Ground Speed: Forward: 10 mph / Reverse: 5 mph
• Fuel Capacity: Twin 7.45 gal. tanks (14.9 gal. total) with dial gauge
• Transmission: Parker HTJ Series (12cc pump / 260cc wheel motor)

Description:

Features:

• 27 HP Kawasaki FX850v (852cc) engine and 12cc Parker HTJ transmission
• 60” triple-7-gauge fabricated steel cutting deck with top, bottom and side reinforcements
• 3-year limited commercial warranty (no hour limitations) and 5 year / 1,750 hour limited deck construction warranty

Description:

Features:

• 35 HP Kawasaki FX1000v (999cc) engine and 16cc Parker HTG transmission
• 60” triple-7-gauge fabricated steel cutting deck with top, bottom and side reinforcements
• 3-year limited commercial warranty (no hour limitations) and 5 year / 1,750 hour limited deck construction warranty

Description:

Features:

• 35 HP Kawasaki FX1000v (999cc) engine and 16cc Parker HTG transmission
• 72” triple-7-gauge fabricated steel cutting deck with top, bottom and side reinforcements
• 3-year limited commercial warranty (no hour limitations) and 5 year / 1,750 hour limited deck construction warranty

Description:

Features:

• Commercial-grade 25.5 hp Kawasaki(R) FX801V (852cc) engine
• A fully fabricated 60-inch 10-gauge steel commercial deck shell with top bottom and side reinforcements plus standard 24" tires give you more ground clearance to easily hop on curbs.
• A large, fully adjustable suspension platform allows you to adjust tension and glide comfortably through tough terrains.
• High-performance commercial Hydro-Gear® PK 12cc pumps & Parker® TL 240cc wheel motors deliver quick response to the drive wheels and smooth control for cutting speeds up to 10 mph.
• 3-year limited commercial warranty (no hour limitations) and 5-year/1,750-hour limited deck assembly warranty.

Description:

Features:

• Commercial-grade 25.5 hp Kawasaki® FX801V (852cc) engine
• A fully fabricated 54-inch 10-gauge steel commercial deck shell with top bottom and side reinforcements plus standard 24" tires give you more ground clearance to easily hop on curbs.
• A large, fully adjustable suspension platform allows you to adjust tension and glide comfortably through tough terrains.
• High-performance commercial Hydro-Gear® PK 12cc pumps & Parker® TL 240cc wheel motors deliver quick response to the drive wheels and smooth control for cutting speeds up to 10 mph.
• 3-year limited commercial warranty (no hour limitations) and 5-year/1,750-hour limited deck assembly warranty.

Specifications:

Engine

• Brand: Kawasaki®
• Model: FX Series – 801V
• Displacement: 852 cc
• Output: 25.5 HP
• Start Type: Electronic (Ignition Key)
• Fuel Type: Gasoline
• Fuel Capacity: 7.5 gal. (28.4 L)
• Oil Capacity: 2.0 qt. (1.89 L)
• Lubrication: Fully Pressurized
• Fuel Delivery: Carburetor
• Charging System: 15 amp regulated
• Air Filter: High-Density
• Oil Filter: Yes
• Choke: Separate Choke
• Cylinders: Twin

Drive System

• Transmission: Dual Hydro – 12cc Hydro-Gear® Pumps / 240cc Parker® Wheel Motors
• Forward Speed: Up to 10 mph / 16 km/h
• Reverse Speed: Up to 5 mph / 8 km/h
• Brakes: Hand Lever-Controlled External Band
• Steering: Lap Bar Steering Wheel Control

Cutting Deck

• Width: 54 in
• Material: 10-gauge steel deck shell with 7-gauge reinforced top & bottom
• Construction: Fabricated
• Spindles: HD 8" Cast Aluminum Housing
• Bearings: 35mm Double-Row Sealed
• Shaft: 1-3/8" Through-Shaft
• Maintenance-Free: Yes
• Blades: Three (3) 19" High-Lift Marbain® Blades
• Blade Overlap: 1.5 in
• Engagement (PTO): Electronic with Quick Reset
• Deck Lift: Hand Lever with Spring Assist and Pin Selector
• Height Range: 1.5 in – 4.5 in
• Anti-Scalp Wheels: 2 Front Gauge Wheels

Chassis & Suspension

• Frame: 2" x 3" Full-Length Tubular Steel
• Front Axle: 2" x 3" Steel Tube
• Caster Mounts: 3/8" Thick Steel
• Suspension: Hand Lever Adjustable
• Platform: 3-Position Spring Suspension Foot Platform

Wheels & Tires

• Rear Tires: 24" x 12" - 12"
• Front Tires: 13" x 5" - 6"
• Type: Reliance Run-Flat (Carlisle®)

Controls & Features

• Cruise Control: Not Applicable
• Hour Meter: Included
• Brakes: External Band with Hand Lever
• Steering Controls: Lap Bar
• Operator Comfort: Spring Suspension Foot Platform

Dimensions

• Weight: Approx. 1080 lbs

Warranty

• Residential: 3-Year No-Hour-Limit
• Deck Shell: 5-Year / 1,750-Hour Limited

Description:

Features:

• Commercial-grade 25.5 hp Kawasaki® FX801V (852cc) engine
• A fully fabricated 54-inch 10-gauge steel commercial deck shell with top bottom and side reinforcements plus standard 24" tires give you more ground clearance to easily hop on curbs.
• A large, fully adjustable suspension platform allows you to adjust tension and glide comfortably through tough terrains.
• High-performance commercial Hydro-Gear® PK 12cc pumps & Parker® TL 240cc wheel motors deliver quick response to the drive wheels and smooth control for cutting speeds up to 10 mph.
• 3-year limited commercial warranty (no hour limitations) and 5-year/1,750-hour limited deck assembly warranty.

Specifications:

Engine

• Brand: Kawasaki®
• Model: FX Series, Model Number 801V
• Displacement: 852cc
• Output: 25.5 HP
• Starter Type: Electronic
• Fuel Tank Capacity: 7.5 gal. US (28.4 L)
• Cylinders: Twin
• Start Type: Ignition Key
• Oil Capacity: 2.0 qt. US (1.89 L)
• Lubrication: Fully pressurized
• Charging System: 15 amp regulated
• Fuel Gauge: Not included
• Choke: Separate Choke
• Air Filter: High Density
• Oil Filter: Yes
• Fuel Delivery: Carburetor

Drive System

• Transmission: 12cc Hydro-Gear® pumps / 240cc Parker® wheel motors
• Forward Speed: 10 mph (16 km/h)
• Reverse Speed: 5 mph (8 km/h)

Cutting Deck

• Width: 54 in
• Material: 10-gauge steel
• Engagement (PTO): Electronic with quick reset
• Construction: 10-gauge shell with 7-gauge top & bottom reinforcement
• Spindle Construction: Heavy-duty 8" aluminum housing, 35mm double-row sealed ball bearings, 1-3/8" through-shaft, maintenance-free
• Blades: Three 19" high-lift Marbain blades, 1-1/2" overlap
• Deck Lift: Hand lever adjusting spring lift with pin selector for height
• Cutting Height Range: 1.5" - 4.5"
• Anti-Scalping: 2 front deck gauge wheels

Chassis

• Frame: 2" x 3" full-length tube frame
• Front Axle: 2" x 3" tube construction
• Front Caster Mount: 3/8" thick steel
• Suspension: Hand lever adjust, 3-position spring suspension foot platform

Controls

• Brakes: Hand lever control / external band
• Steering: Lap Bar Steering Wheel Control

Wheels

• Rear Tires: 24"x12"-12"
• Front Tires: 13x5-6" Reliance Run Flat Carlisle

Dimensions

• Length/Width/Height: 69" / 68" / 56"
• Weight (approx.): 1080 lbs

Additional Specifications

• Hour Meter: Crew Boss
• Model Number: 53AI8CSA050
• Residential Warranty: 3-year / no-hour-limit
• Deck Shell Warranty: 5-year / 1,750-hour limited manufacturer’s warranty

Description:

Features:

• Commercial-grade 22 hp Kawasaki® FX691V (726cc) engine
• A fully fabricated 48-inch 10-gauge steel commercial deck shell with top bottom and side reinforcements plus standard 24" tires give you more ground clearance to easily hop on curbs.
• A large, fully adjustable suspension platform allows you to adjust tension and glide comfortably through tough terrains.
• High-performance commercial Hydro-Gear® PK 12cc pumps & Parker® TL 240cc wheel motors deliver quick response to the drive wheels and smooth control for cutting speeds up to 10 mph.
• 3-year limited commercial warranty (no hour limitations) and 5-year/1,750-hour limited deck assembly warranty.

Specifications:

Engine

• Brand: Kawasaki®
• Series: FX Series
• Model Number: 691V
• Displacement: 726 cc
• Output: 22 HP
• Start Type: Electric with Quick Reset
• Fuel Capacity: 7.5 gal (28.4 L)
• Cylinders: Twin
• Oil Capacity: 2.0 qt (1.89 L)
• Lubrication: Fully pressurized
• Charging System: 15 amp regulated
• Fuel Delivery: Carburetor
• Air Filter: High Density
• Oil Filter: Yes
• Choke: Separate
• Fuel Gauge: No

Drive System

• Transmission: 12cc Hydro-Gear® Pumps / 240cc Parker® Wheel Motors
• Forward Speed: Up to 10 mph (16 km/h)
• Reverse Speed: Up to 5 mph (8 km/h)
• Brakes: Hand lever / external band
• Steering Control: Lap Bar Steering Wheel Control

Chassis / Suspension

• Frame: 2" x 3" full-length tube frame
• Front Axle: 2" x 3" tube construction
• Front Caster Mount: 3/8" thick steel
• Suspension: Spring platform, 3-position, adjustable by hand lever
• Rear Tires: 24"x 9.5" - 12"
• Front Tires: 13 x 5 - 6" Reliance Run-Flat (Carlisle)

Cutting Deck

• Deck Width: 48 in.
• Construction: 10-gauge shell reinforced with 7-gauge top & bottom
• Spindle Housing: 8" aluminum housing, 35mm sealed ball bearings, 1-3/8" shaft, maintenance-free
• Blade Setup: 3 x 17" high-lift Marbain® blades with 1.5" overlap
• Engagement (PTO): Electric
• Deck Lift: Manual lever with spring assist & pin-selector
• Cutting Height Range: 1.5” – 4.5”
• Anti-Scalp Wheels: 2 front gauge wheels

Dimensions

• Weight (Approx.): 1,015 lbs
• Hour Meter: Yes (Crew Boss interface)

Warranty

• Residential: 3-year, no-hour-limit
• Deck Shell: 5-year / 1,750-hour limited

Description:

The Cub Cadet® PRO X 636 36-in. 18.5 HP* Commercial Stand-On Lawn Mower features a fully fabricated 10-gauge steel commercial deck shell with top, bottom and side reinforcements. Standard 21-in. tires are designed to give you ground clearance to easily hop on curbs. A large, fully adjustable suspension platform is engineered to allow you to glide comfortably through tough terrains.

Features:

• Commercial-grade 18.5 hp Kawasaki® FS600V (603cc) engine
• A fully fabricated 36-inch 10-gauge steel commercial deck shell with top bottom and side reinforcements plus standard 21" tires give you more ground clearance to easily back over curbs.
• A large suspension platform allows you to glide comfortably over tough terrains.
• High-performance commercial Hydro-Gear® PK 12cc pumps & Parker® TL 240cc wheel motors deliver quick response to the drive wheels and smooth control for cutting speeds up to 8.5 mph.
• 2-year limited commercial warranty with no hour limitations.

Specification:

Engine

• Engine Brand: Kawasaki®
• Engine Model: FS Series
• Engine Model Number: 600V
• Engine Displacement: 603cc
• Engine Output: 18.5HP
• Starter Type: Electronic with quick reset
• Fuel Tank Capacity: 6 gal. US (22.7 L)
• Cylinders: Twin
• Engine Start: Ignition Key
• Engine Oil Capacity: 2.0 qt. US (1.89 L)
• Lubrication: Fully pressurized
• Charging System: 15 amp regulated
• Fuel Gauge: No
• Choke: Separate Choke
• Air Filter: High Density
• Oil Filter: Yes
• Fuel Delivery: Carburetor

Drive System

• Transmission: 12cc Hydro-Gear® pumps / 240cc Parker® wheel motors
• Forward Speed: 8.5 mph / 13.6 km/h
• Reverse Speed: 3.5 mph / 5.6 km/h

Cutting Deck

• Deck Cutting Width: 36 in
• Deck Engagement (PTO): Electric
• Deck Construction: 10 ga shell w/ 7 ga top & bottom reinforcement
• Spindle Construction: 5” sealed cast aluminum housing (maintenance-free)
• Blade(s): Two 18.5" high-lift blades, 1-1/2" of blade overlap
• Deck Lift: Hand lever adjusting spring lift, pin selector for height
• Cutting Height Range: 1.75" - 4.5"
• Anti-Scalping: N/A

Chassis

• Frame: 1.5" x 3" full-length tube frame
• Front Axle: 1.5" x 3" tube construction
• Front Caster Mount: 3/8" thick steel
• Suspension: None

Controls

• Cruise Control: N/A
• Brakes: Hand Lever actuated scrub brake
• Steering Control: Lap Bar Steering Control

Wheels

• Rear Tires: 21"x 8.5"-10"
• Front Tires: 11x4-5 RF

Additional Specifications

• Hour Meter: Crew Boss
• Model Number: 53RZ3CSB050

Warranty

• Residential Warranty: 2-year / no-hour-limit warranty