Description:

The MS 162 chainsaw is optimal for homeowners and occasional use. It is lightweight and maneuverable features reduced exhaust emissions and an anti-vibration system for increased operator comfort. The Master Control Lever™ allows you to operate the choke, throttle lock, and on-off switch with a single lever making this tool an ideal homeowner chainsaw.

Features:

• STIHL® Quickstop® - STIHL® chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• STIHL OILOMATIC® Saw Chain - The chain features specially engineered grooves designed to channel oil to critical wear areas.
• Easy-to-Use Homeowner Chainsaw - Featuring powerful performance and lightweight convenience, this homeowner chain saw gets the job done when it comes to yard maintenance and cutting firewood.
• Front Hand Guard - The hand guard is designed to reduce the risk of injury.
• Rear Hand Guard - The hand guard is designed to reduce the risk of injury and provide a wide area for foot placement during starting.
• Lightweight Portability - This product is lightweight for easy portability, great maneuverability, and extended use.
• Translucent Fuel Tank - The semi-transparency allows operators to easily check the fuel level before starting work.
• Easy-Access Air Filter Cover - The provided easy-access makes it almost effortless to remove the cover for fast filter cleaning or replacement.
• Spark Arrester Muffler - Large baffles reduce noise level and contain a screen designed to reduce the emission of sparks.
• Anti-Vibration System - STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Master Control Lever™ - The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Side-Access Chain Tensioner - The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Throttle Trigger Interlock - This safety feature must be depressed before the trigger can be activated.
• High-Tech Polymer Housings - Housings are lightweight, withstand greater impact, and are corrosion-resistant.
• Made in America - A majority of STIHL products sold in America are made in America of U.S. and global materials.

Specifications:

• Power Source: Gas
• Powerhead Weight: 9.9 lbs.
• Guide Bar Length (Recommended): 16 in.
• Chain Type: OILOMATIC® 3/8" PMM3
• Chain Oil Capacity: 9.5 oz.
• Engine Power: 1.6 bhp
• Fuel Capacity: 13.5 oz.
• Displacement: 30.1 cc

Description:

The STIHL FS 56 RC-E line trimmer sets a new standard in performance, boasting a high-performance, fuel-efficient engine that runs cleaner and smoother than ever before. With approximately 5% more power than its predecessor, the FS 55 R, this trimmer delivers exceptional results while maintaining fuel efficiency. Whether it's tackling tough weeds or keeping the lawn in pristine condition, the FS 56 RC-E trimmer ensures maximum productivity with minimal effort.

Featuring the AutoCut® cutting head, replenishing trimmer line is effortless – simply tap the cutting head on the ground for automatic line feeding. The innovative Easy2Start™ technology makes starting nearly effortless, with a simple, reliable, and convenient starting procedure. The momentary stop switch automatically returns to the start position, ensuring the trimmer is always ready to get to work.

For comfort, performance, and maneuverability, the FS 56 RC-E trimmer hits the sweet spot, making it the go-to choice for professional landscapers and homeowners alike.

Features:

• Reduced-Emission Engine Technology - Caring for Nature: Identified by the STIHL Inc. “Caring for Nature” seal, signifying environmentally conscious design with zero or low exhaust emissions, meeting stringent EPA and/or CARB standards.
• Adjustable Front Handle: Easily adjustable (360-degree rotation) for personalized comfort during operation.
• Shoulder Strap / Carrying System: Distributes the weight of the equipment for increased operator comfort and improved maneuverability.
• High-Tech Polymer Housing: Lightweight, impact-resistant, and corrosion-resistant housing material.
• Upright Translucent Fuel Tank: Allows easy fuel level checks before starting work, with an upright position for convenient refilling.
• Protected Spark Plug: Easy to change and protected against damage.
• Protected Spark Arrestor Muffler: Features large baffles to reduce noise levels and a screen to minimize spark emissions.
• Fully Lined Drive Shaft: Provides smooth operation and minimizes vibration.
• Throttle Trigger Interlock: Ensures safe operation by requiring depression of the interlock before activating the trigger.
• Protected Choke Lever/Knob: Helps prevent damage during operation.
• Air Filter Cover: Easily removable for fast and easy filter cleaning or replacement.
• Protected or Enclosed Control Cables: Eliminates dangling wires for enhanced safety.
• Heavy-Duty Steel-On-Steel Clutch: Centrifugal clutch design reduces slippage during operation.

Specifications:

• Power Source: Gas
• Weight: 10.6 lbs. (excluding cutting attachment or deflector)
• Cutting Width: 16.5 inches
• Engine Power: 1.07 bhp (brake horsepower)
• Fuel Capacity: 11.5 oz.
• Displacement: 27.2 cc

Description:

Give your home that professionally landscaped look with the STIHL FC 56 C-E edger. With its fuel-efficient, low exhaust emission STIHL engine, this edger powers through curbside annoyances like overgrown grass, thick weeds, and compacted soil. Thanks to its semi-automatic choke lever and Easy2Start™ system, starting the edger is easy —gently pull the cord and start defining your outdoor spaces. Its adjustable depth wheel even lets you select different cutting depths, so you can give your walkways, driveways, and areas of your property the perfect amount of definition.

Features:

• Reduced-Emission Engine Technology—Caring for Nature - The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.
• Made in America - A majority of STIHL products sold in America are made in America of U.S. and global materials.
• "Open" Guard Design - The professional “open” guard design helps minimize clogging, allowing for more efficient cutting.
• Skid Plate - All STIHL edgers come equipped with a skid plate to protect the gearbox during use.
• Adjustable Depth Wheel - The feature allows the user to easily adjust the wheel to the desired cutting depth for creating precision cuts.
• STIHL Easy2Start™ - The STIHL Easy2Start™ system makes starting STIHL outdoor power tools almost effortless, eliminating the need for a strong pull of the starting cord. This advanced starting system is designed to make starting STIHL products fast and easy. The specific system may vary by model, but in each case, a quick pull overcomes the engine’s compression to minimize the strength and effort required to start. Available on selected products.
• Stop Switch - With the Stop Switch, the equipment’s ignition is always ready for starting. Products with this feature shut off easily by pressing and holding down the switch. When the switch is released, it returns to the start position automatically, reducing the number of steps needed to start the product.

Specification:

• Power Source: Gas
• Weight: 13.5 lbs
• Shaft Design: Curved
• Blade Speed: 8,300 rpm (revolutions per minute)
• Gear Ratio: 1:1.24
• Arbor Size: 1 inch
• Blade Size: 8 inches
• Engine Power: 1.07 bhp (brake horsepower)
• Fuel Capacity: 11.5 oz (ounces)
• Displacement: 27.2 cc (cubic centimeters)
• Intended Use: Homeowner

Description:

Brains and brawn come together in this well-rounded professional-grade chainsaw. The MS 362 C-M delivers the same outstanding power-to-weight ratio, fuel efficiency, and rugged reliability as the MS 362—but with the added advantage of STIHL M-Tronic™ technology.

This exclusive microprocessor-controlled engine management system continuously monitors and automatically adjusts engine performance based on real-time operating conditions—including temperature, altitude, fuel quality, and air filter status. The result? Optimized cutting power, consistent performance, and maximum efficiency, no matter the conditions.

Whether you’re felling, bucking, or limbing, the MS 362 C-M ensures you always operate at peak power—so you can get more done with less downtime.

Features:

• STIHL M-Tronic™ - This product features STIHL M-Tronic™ (M) - a new generation of Intelligent Engine Management that eliminates the low and high speed carburetor adjustment screws, compensates for dirty air filter and changes in elevation and fuel quality for optimum engine power at all times.
• STIHL ElastoStart™ - The STIHL ElastoStart™ starter handle is an exclusive feature of STIHL®. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The STIHL ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• STIHL Quickstop® - STIHL® chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• Decompression Valve - The decompression valve, also referred to as 'deco' or 'deco valve', vents compression in the cylinder for easier starting. The decompression valve temporarily reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope. It is opened manually and closes automatically as soon as the engine fires.
• Pre-Separation Air Filtration System - This time-saving technology boosts the efficiency of the engine’s filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
• Side-Access Chain Tensioner - The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Master Control Lever™ - The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Anti-Vibration System - STIHL® has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL® anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Toolless Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.

Specifications:

• Power Source: Gas
• Weight: 12.35 lbs (powerhead only)
• Recommended Bar Length: 18 inches
• Chain Type: 3/8" RS3 (OILOMATIC®)
• Chain Oil Capacity: 11 oz
• Engine Power: 4.7 bhp
• Fuel Capacity: 20.3 oz
• Displacement: 59.0 cc
• Use: Professional

Recommended Setup:

• Chain: #3624 (33 RS3-72)
• Guide Bar: 20” (3003 008 8921 Ematic™)
• Compatible Bar Range: 16"–25"

Description:

The MS 261 C-M has all the same great features as the MS 261—low exhaust emissions, high fuel efficiency and robust performance—but also features the advanced STIHL M-Tronic™ engine management system. The STIHL M-Tronic™ onboard microprocessor digitally monitors and automatically compensates for changes in your work conditions, including elevation, temperature, fuel quality, varying octane levels, and dirty filters. The end result is maximum performance across a wide range of cutting conditions without making any manual adjustments. The MS 261 C-M also features redesigned cylinders and a slimmer, ergonomic housing for an impressive power-to-weight ratio.

Features:

• STIHL M-Tronic™ – This product features M-Tronic™ (M) – a new generation of Intelligent Engine Management that eliminates the low and high speed carburetor adjustment screws, compensates for dirty air filter and changes in elevation and fuel quality for optimum engine power at all times.
• Ematic™ Lubrication System – The Ematic™ guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
• STIHL ElastoStart™ – The ElastoStart™ starter handle is an exclusive feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
• IntelliCarb™ Compensating Carburetor – The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• STIHL Quickstop® – STIHL chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
• Bumper Spikes – These spikes prevent pull-in and provide better control, making cutting easier.
• Adjustable Automatic Oiler – The Adjustable Automatic Oiler allows the user to adjust the lubricant of the guide bar and saw chain for different bar lengths and cutting conditions.
• Decompression Valve – The decompression valve, also referred to as 'deco' or 'deco valve', vents compression in the cylinder for easier starting. The decompression valve temporarily reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope. It is opened manually and closes automatically as soon as the engine fires.
• Pre-Separation Air Filtration System – This time-saving technology boosts the efficiency of the engine’s filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
• Side-Access Chain Tensioner – The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Master Control Lever™ – The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Anti-Vibration System – STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Toolless Fuel and Oil Caps with Retainers – Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Throttle Trigger Lock – See it in action!
• Reduced-Emission Engine Technology—Caring for Nature – The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

Specifications:

• Power Source: Gas
• Powerhead Weight: 10.8 lbs.
• Guide Bar Length (Recommended): 16 in.
• OILOMATIC® Chain: .325" RM3
• Chain Oil Capacity: 9.13 oz.
• Engine Power: 4.0 bhp (brake horsepower)
• Fuel Capacity: 16.9 oz.
• Displacement: 50.2 cc

Description:

The MS 261 chainsaw delivers low exhaust emissions, high fuel efficiency, and, of course, professional-grade performance. Its redesigned cylinder and ergonomic housing deliver a great power-to-weight ratio, weighing just 10.8 lbs. Designed for large volume cutting, the MS 261 also features the STIHL anti-vibration system for enhanced comfort. Other convenience features include a pre-separation air filtration system and a redesigned spiked bumper. Add the MS 261 to your jobsite today.

Features:

• Ematic™ Lubrication System - The Ematic™ guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
• STIHL ElastoStart™ - The ElastoStart™ starter handle is an exclusive feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• STIHL Quickstop® - STIHL chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• Adjustable Automatic Oiler - The Adjustable Automatic Oiler allows the user to adjust the lubricant of the guide bar and saw chain for different bar lengths and cutting conditions.
• Decompression Valve - The decompression valve, also referred to as 'deco' or 'deco valve', vents compression in the cylinder for easier starting. The decompression valve temporarily reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope. It is opened manually and closes automatically as soon as the engine fires.
• Pre-Separation Air Filtration System - This time-saving technology boosts the efficiency of the engine’s filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
• Side-Access Chain Tensioner - The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Master Control Lever™ - The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Anti-Vibration System - STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Toolless Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Throttle Trigger Lock - See it in action!
• Reduced-Emission Engine Technology—Caring for Nature - The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

Specification:

• Power Source: Gas
• Powerhead Weight: 10.8 lbs
• Guide Bar Length (Recommended): 16 in
• OILOMATIC® Chain: .325" RM3
• Chain Oil Capacity: 9.13 oz
• Engine Power: 4.0 bhp
• Fuel Capacity: 16.9 oz
• Displacement: 50.2 cc
• Intended Use: Professional

Description:

Get great value with the STIHL® FSA 57 lithium-ion trimmer. A lightweight, battery-powered trimmer, the FSA 57 is an ideal choice for maintaining suburban yards. This trimmer cuts an 11" swath at a continuous high speed, saving time and doing more with a STIHL® AK System battery. With an AK 10 battery, this trimmer weighs less than eight pounds and has a run time of up to 25 minutes* On A Single Charge™.

For comfort and convenience, this unit features an adjustable shaft to customize height, an easy-to-use AutoCut® head which feeds Quiet Line™ noise-reducing line, and a bump guard to help trim carefully around obstacles like trees and shrubs. The FSA 57 trimmer is available as a stand-alone unit or as a value-priced set with the AK 10 battery and AL 101 battery charger. Other battery options are available.

*Run time may vary based on battery type, charge level and capacity, model, operating style, and conditions.

Features:

• TapAction™ AutoCut® Head – With the TapAction™ AutoCut® cutting head, experience easy line refilling by simply tapping the head to feed the line.
• Loop Handle – A thumb screw allows the ergonomic loop handle to be easily adjusted to the desired position without tools.
• Multi-Function Control Handle – Having easy access to all of the controls on one comfortable handle makes it easy to complete tasks so the operator’s hand never has to leave the handle.
• Hanging Loop – Hang your product securely on a wall to save space using the loop in the handle housing.
• Lightweight Portability – This product is lightweight for easy portability, great maneuverability, and extended use.
• Retaining Latch – All STIHL® battery-powered products feature a retaining latch that is designed to prevent the unit from unintentional starts when the battery is inserted.
• High-Tech Polymer Housing – Housings are lightweight, withstand greater impact, and are corrosion-resistant.
• Throttle Trigger Interlock – This safety feature must be depressed before the trigger can be activated.
• Reduced-Emission Engine Technology—Caring for Nature – The STIHL® Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL® Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.
• Made in America – A majority of STIHL® products sold in America are Made in America of U.S. and global materials.

Specification:

• Power Source: Battery
• Weight: 5.9 lbs. (7.7 lbs. with AK 10 battery)
• Battery System: AK System
• Run Time (with AK 10): Up to 25 minutes
• Voltage: 36 volts
• Cutting Width: 11 inches

Description:

As the lightest saw in the STIHL® range, the MS 151 T C-E is an impressive gas-powered professional in-tree saw that boasts critical, performance-enhancing features. With its light weight and excellent maneuverability, this saw minimizes fatigue, allowing arborists and other professionals to work longer and get more done. Additionally, the MS 151 T C-E delivers excellent performance with lower exhaust emissions and increased fuel efficiency compared to the previous model making it ideal for its purpose of in-tree work.

Features:

• Top Handle™ (T) - The top-handle model is specially designed for in-tree professional use only!
• STIHL Easy2Start™ (E) - The STIHL Easy2Start™ system makes starting STIHL® outdoor power tools almost effortless, eliminating the need for a strong pull of the starting cord. This advanced starting system is designed to make starting STIHL® products easier. The specific system may vary by model, but in each case, a quick pull overcomes the engine’s compression to minimize the strength and effort required to start. Available on selected products.
• STIHL Quickstop® - STIHL® chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• STIHL OILOMATIC® Saw Chain - The chain features specially engineered grooves designed to channel oil to critical wear areas.
• Adjustable Automatic Oiler - The Adjustable Automatic Oiler allows the user to adjust the lubricant of the guide bar and saw chain for different bar lengths and cutting conditions.
• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• Lightweight Portability - This product is lightweight for easy portability, great maneuverability, and extended use.
• Powerful Low Exhaust Emission Engine - A powerful low exhaust emission engine saves users fuel and operating costs without losing the power they count on to get the job done.
• Built-In Retractable Carry Ring - The built-in carry ring makes it convenient and easy to maneuver in and out of trees.
• Side-Access Chain Tensioner - The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Purge Pump Primer - The purge pump primer feature enables the user to prime the carburetor with fuel, enabling easier starting. The purge pump primer is designed in a way that the operator cannot flood the machine by priming the carburetor too many times. Flooding the engine is still possible if the choke is not removed after the engine turns over.
• Anti-Vibration System™ - STIHL® has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL® Anti-Vibration System™ helps reduce operator fatigue and provides a more comfortable working experience.
• Throttle Trigger Interlock™ - This safety feature must be depressed before the trigger can be activated.
• High-Tech Polymer Housings - Housings are lightweight, durable, and corrosion resistant.
• Ease of Use with Less Fatigue - The lightweight and easy-to-use MS 151 T C-E minimizes fatigue, allowing users to work longer and get more done.

Specification:

• Power Source: Gas
• Powerhead Weight: 5.7 lbs.
• Guide Bar Length (Recommended): 12 in.
• Chain Type: OILOMATIC® 1/4" PM3
• Chain Oil Capacity: 5.07 oz.
• Engine Power: 1.3 bhp
• Fuel Capacity: 6.76 oz.
• Displacement: 23.6 cc

Description:

The MS 201 C-EM delivers high power and smart technology in a lightweight package. The added STIHL M-Tronic™ intelligent engine management system automatically adapts to changes in environmental factors such as fuel quality and altitude. The result is a reliable and fuel-efficient machine that performs optimally in a variety of conditions.

In addition, the MS 201 C-EM features STIHL Easy2Start™ technology—making engine starting almost effortless. Farm BOSS® and ranch jobs will be made easier with use of this well-balanced, low-vibration, and durable chainsaw.

Features:

• STIHL Ematic™ Lubrication System – The STIHL Ematic™ guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
• STIHL Easy2Start™ (E) – The STIHL Easy2Start™ system makes starting STIHL® outdoor power tools almost effortless, eliminating the need for a strong pull of the starting cord. This advanced starting system is designed to make starting STIHL® products easier. The specific system may vary by model, but in each case, a quick pull overcomes the engine’s compression to minimize the strength and effort required to start. Available on selected products.
• STIHL M-Tronic™ – This product features STIHL M-Tronic™ (M) – a new generation of Intelligent Engine Management that eliminates the low and high-speed carburetor adjustment screws, compensates for dirty air filters and changes in elevation and fuel quality for optimum engine power at all times.
• STIHL Quickstop® – STIHL® chainsaws are equipped with a chain-stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
• Adjustable Automatic Oiler – The Adjustable Automatic Oiler allows the user to adjust the lubricant of the guide bar and saw chain for different bar lengths and cutting conditions.
• Bumper Spikes – These spikes prevent pull-in and provide better control, making cutting easier.
• Translucent Fuel Tank – The semi-transparency allows operators to easily check the fuel level before starting work.
• Toolless Fuel and Oil Caps with Retainers – Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Side-Access Chain Tensioner – The Side-Access Chain Tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• STIHL Anti-Vibration System – STIHL® has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL Anti-Vibration System helps reduce operator fatigue and provides a more comfortable working experience.
• Throttle Trigger Interlock – This safety feature must be depressed before the trigger can be activated.
• High-Tech Polymer Housings – STIHL High-Tech Polymer Housings are lightweight, withstand greater impact, and are corrosion-resistant.
• Reduced-Emission Engine Technology—Caring for Nature – The STIHL® Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL® Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

Specifications:

• Power Source: Gas
• Powerhead Weight: 9.0 lbs.
• Guide Bar Length (Recommended): 14 in.
• Oilomatic® Chain: 3/8" PS3
• Chain Oil Capacity: 7.4 oz.
• Engine Power: 2.41 bhp
• Fuel Capacity: 10.5 oz.
• Displacement: 35.2 cc
• Intended Use: Farm/Ranch

Description:

Cordless brushcutter for clearing work. Cutting arc diameter 300 mm, rubberized 2-component handle, infinitely variable round handle, the mowing line automatically readjusts when the mowing head is tapped on the ground, quiet, no ear protection necessary, weight 2.7 kg

Specification:

• Weight:
• 2.7 kg (6 lbs.)
• With AP 80: 3.8 kg (8.4 lbs.)
• With AP 160: 4.4 kg (9.7 lbs.)
• Rated Voltage: 36 V
• Cutting Tool: AutoCut C4-2 mowing head
• Recommended Battery: AP 115
• Sound Levels:
• Sound Pressure Level: 75 dB(A)
• Sound Power Level: 91 dB(A)
• Vibration Levels:
• Left: 1.3 m/s²
• Right: 1.1 m/s²
• Total Length: 153 cm
• Cutting Circle Diameter: 300 mm

Description:

With its lightweight design and powerful performance backed by the AP Battery System, the STIHL® FSA 86 R trimmer is a tool ideal for professional landscapers, farms, ranches, and large homeowner properties. Its brushless motor virtually eliminates the need for routine maintenance. With a 13.8” cutting swath, this trimmer can clear a wide area in a single pass, while its bump guard allows you to carefully trim around obstacles like trees and shrubs. Optimally paired with the AP 200 battery, the FSA 86 R has a run time of up to 30 minutes.

Features:

• STIHL® Electric Motor - Lightweight and compact, STIHL® electric motors require minimal maintenance and feature low noise levels and reduced vibration.
• AutoCut® C EasySpool™ - AutoCut® C versions reload line by simply inserting the line into eyelets and twisting the bump knob.
• Loop Handle - A thumb screw allows the ergonomic loop handle to be easily adjusted to the desired position without tools.
• Adjustable Front Handle - The front handle is easily adjustable (360-degree rotation) for comfort.
• Start/Run/Stop Controls on Handle - Convenient start/run/stop controls are built into the handle for easy operation.
• Variable-Speed Trigger - The variable-speed trigger allows precise control for each task.
• Hanging Loop - Hang your cordless trimmer securely on a wall to save space using the loop in the handle housing.
• Lightweight Portability - This product is lightweight for easy portability, great maneuverability, and extended use.
• Retaining Latch - All STIHL® battery-powered products feature a retaining latch that is designed to prevent the unit from unintentional starts when the battery is inserted.
• High-Tech Polymer Housing - Housings are lightweight, withstand greater impact, and are corrosion-resistant.
• Throttle Trigger Interlock - This safety feature must be depressed before the trigger can be activated.
• Reduced-Emission Engine Technology—Caring for Nature - The STIHL® Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL® Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

Specification:

• Power Source: Battery
• Weight: 7.3 lbs.
• Weight (with AP 200): 10.2 lbs.
• Battery System: AP System
• Run Time (with AP 200): Up to 30 min.
• Voltage: 36 volt
• Cutting Width: 13.8 in.

Description:

For mowing tough grass. STIHL 4-point anti-vibration system, STIHL ErgoStart™, multi-function handle, bike handle, tool-free handle adjustment, STIHL 2-MIX™ engine, STIHL M-Tronic™.

Specifications:

• Displacement: 37.7 cm³
• Power Output: 1.7 kW / 2.3 PS
• Weight: 8.5 kg
• Sound Levels:
• Sound Pressure Level (Plastic Tool): 99 dB(A)
• Sound Power Level (Metal Tool): 110 dB(A)
• Sound Power Level (Plastic Tool): 112 dB(A)
• Sound Pressure Level (Metal Tool): 98 dB(A)
• Vibration Levels:
• Left/Right (Plastic Tool): 2.5 / 2.2 m/s²
• Left/Right (Metal Tool): 2.2 / 2.0 m/s²
• Total Length: 179 cm
• Cutting Tool: Brush Knife 300-3

Description:

Enjoy a smooth ride and take on tough jobs with the STIHL RZ 760i K zero-turn mower featuring an innovative suspension system with mowing deck height compensation for a smooth ride and a 60" mowing deck for wide cutting swaths. The Kawasaki Electronic Fuel Injection (EFI) engine provides reliable operation and consistent power output, and the commercial-grade materials and components make this mower tough and durable.

Features:

• Kawasaki 26 hp EFI Engine with Electronic Throttle Control - The STIHL RZ 752i K and STIHL RZ 760i K feature a Kawasaki Electronic Fuel Injection (EFI) engine with engine throttle control which provides fuel-efficient operation.
• Commercial-Grade Hydro-Gear® ZT-4400 Transaxles - Hydro-Gear® ZT-4400 transaxles enable ten mph forward ground speed and five mph in reverse, helping allow for smooth and efficient cutting.
• Heavy-Duty 8” Cast Iron Greaseable Mower Deck Spindles - The STIHL RZ 700 Series’ eight-inch cast iron greaseable mower deck spindles are easy to maintain.
• Deluxe Seat with Armrests - Deluxe seating includes armrests to ensure a comfortable ride throughout the job.
• Large Fuel Capacity - With a fuel gauge that is visible from the operator's seat, not only can users monitor fuel level and experience fuel coverage for large jobs, but the wide opening also makes fueling easy.
• Four-Wheel Suspension System with Independent Front Suspension and Rear Shock Absorbers - Adjustable to suit your yard’s terrain, the rear suspension uses shock absorbers to help stabilize the machine for a consistent cutting height and a smooth, comfortable ride.
• Independent Front Suspension with Mower Deck Height Compensation - Independent front suspension features two control arms that connect to shock absorbers, designed to ensure wheels remain perpendicular to the ground throughout the range of travel.
• Swingarm Rear Suspension with Shock Absorbers - The adjustable rear suspension with shock absorbers are designed to help provide performance and comfort while mowing uneven surfaces.
• Efficient Two-Belt Mower Drive System - Two-belt mower drive system results in less strain and flex on the belts, allowing the belts to run cooler and enabling a longer lifespan and less maintenance.
• Two USB-A Ports - Two USB-A ports provide 3.15 amps of power to charge devices.
• Roll Over Protection System (ROPS) - The advanced ROPS features polyurethane blocks to prevent rattling while in motion and conveniently folds for easy storage and trailer transport between jobs.
• Flip-Up Floor Pan - Flip-up floor provides convenient serviceability and cleaning of the mowing deck.
• Foot-Operated Cutting Height - Users can easily adjust the cutting height while seated.
• Dual-Function Hour Meter - Dual-function hour meter tracks both run time and hours of mowing time to assist users in keeping up with regular maintenance tasks.
• Flexible Side Rubber Discharge Chute - Chute allows grass clippings to be released to the side of the mower and out of the way of the cutting path.
• Integrated Cup Holders - Cup holders conveniently keep drinks secure and within reach.
• Trailer Hitch - This zero-turn mower features a rear trailer hitch for towing additional accessories and attachments.* *Accessories and attachments sold separately.
• Made in America - A majority of STIHL products sold in America are made in America of U.S. and global materials.

Specification:

ENGINE

• Horsepower: 26 hp
• Fuel System: Electronic Fuel Injection (EFI)
• Fuel Tank Capacity: 11 gal
• Displacement: 726 cc
• Engine Governor: Electronic Throttle Control

TRANSAXLES

• Transaxles: Hydro-Gear® ZT-4400

PERFORMANCE

• Forward Ground Speed: 10 mph
• Reverse Ground Speed: 5 mph

DECK

• Deck Width: 60 in
• Mowing Height Range: 1.5" - 5"
• Deck Construction: Fabricated from 10-gauge steel with a 10-gauge doubler in the spindle area and 1/2" reinforcement plates on the leading edge
• Cutting Height Options: 13
• Blades: 3 - MARBAIN® Hardened

TIRES

• Front Tires: 13 x 6.5-6
• Rear Tires: 24 x 12-12

WEIGHT

• Weight: 1,389 lbs

OTHERS

• Power Source: Gas
• Spindle Shaft Diameter: 1 in
• Spindle Bearings: 2.5" x 1" Dual Ball Bearing
• Spindle Hubs: 7.9" Cast Iron & Greaseable
• USB Amperage: 3.15 A
• Front Suspension Travel: 2.68 in
• Rear Suspension Travel: 2.68 in

Description:

STIHL® introduces another world’s first—a cut-off machine powered by 36-volt lithium-ion battery technology. The TSA 230 STIHL® Cutquik® cut-off machine starts instantly and changes the game for the jobsite, delivering maneuverability and solid cutting performance in a lightweight, compact package. Its onboard water control helps suppress dust while a toolless wheel lock prevents wheel rotation when removing the wheel attachment bolt. Because it is battery powered, there is no air filter to maintain. The TSA 230 not only provides great value—priced below its gasoline-powered counterparts—but this STIHL® Cutquik® also offers groundbreaking innovation grounded in quality engineering.

Run time may vary based on battery type, charge level and capacity, model, operating style, and conditions. Batteries and chargers can be purchased separately or as a combined set with tool.

Features:

• Sealed Control Unit - Sealed control unit for improved water resistance while wet cutting.
• Magnesium Guard - The cutting wheel guard is made from lightweight and durable magnesium to improve maneuverability.
• Spindle Locking Mechanism - The spindle locking mechanism allows the user to lock the wheel rotation for easier removal of the wheel.
• Water Connection and Shut-Off Valve - The water connection is designed for the user to shut off the water when the unit is not in use and not waste water.
• Sealed Belt Drive - Maintenance-free sealed belt drive.
• STIHL® QuickStop™ Wheel Brake - Allows extended guard adjustability by reducing the risk of injury from kickback when the guard has been adjusted to expose the top portion of the wheel 
• Electronic Coaster Brake - Stops wheel after use.
• Lightweight Portability - This product is lightweight for easy portability, great maneuverability, and extended use.
• Compact, Ergonomic Design - The compact, ergonomic design provides more comfortable use.
• Brushless Motor - The advanced brushless motor virtually eliminates maintenance while supplying the power and performance you expect from STIHL®.
• Reduced-Emission Engine Technology—Caring for Nature - The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

Specifications:

• Power Source: Battery
• Weight: 8.6 lbs.
• Maximum Cutting Depth: 2.75 inches
• Maximum Wheel Size: 9 inches
• Arbor Size: 7/8 inch
• Battery System: AP System
• Voltage: 36 volt
• Run Time (w/ AP 200 battery): Up to 14 minutes
• Run Time (w/ AP 100 battery): Up to 7 minutes
• Run Time (w/ AP 300 S battery): Up to 22 minutes
• Run Time (w/ AP 300 battery): Up to 18 minutes

Description:

The STIHL® TS 410 is a compact, efficient cut-off machine designed for ease of use and reduced maintenance. With a 12” cutting wheel, it is capable of tackling materials like iron, steel, and concrete. This model features advanced air filtration technology that efficiently removes dust and particles before they reach the engine, helping extend filter life and reduce routine maintenance. It also includes a vibration-dampening system to support operator comfort during extended use.

NOTE: Abrasive wheel included. Diamond wheel sold separately.

Features:

• Reduced-Emission Engine Technology—Caring for Nature - The STIHL® Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL® Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• X2 Air Filtration System - The X2 Air Filtration System revolutionizes the STIHL® cut-off machine industry by allowing air filters to last up to a year, based on cutting conditions. Outside air enters the system in a swirling motion, removing 80% of dust particles. This pre-cleaned air is then routed through the primary and secondary air filters before being sent into the engine. The X2 Air Filtration System is virtually maintenance free and maintains an incredible 99.96% cleaning efficiency.
• Semi-Automatic Belt Tensioning - With consistent semi-automatic re-tensioning, this feature increases the service life of the belts and shaft bearings.
• Bayonet-Style Filler Cap - Includes retainer for easy use, even with gloves on.
• Anti-Vibration System - STIHL® has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL® anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• ElastoStart™ - The ElastoStart™ starter handle is a feature of STIHL®. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
• Ergonomic Grip - The ergonomic top-handle bar design provides an optimal comfortable grip in any working position.
• Water Connection - Water connection with shut-off valve and quick connector.

Specifications:

• Power Source: Gas
• Weight: 20.7 lbs.
• Maximum Cutting Depth: 3.9 in.
• Maximum Wheel Size: 12 in.
• Maximum Spindle Speed: 5,350 rpm
• Arbor Size: 0.79 in
• Engine Speed: 9,000 rpm
• Engine Power: 4.4 bhp (brake horsepower)
• Fuel Capacity: 24 oz.
• Displacement: 66.7 cc

Description:

This powerful, fuel-efficient, liquid-only backpack sprayer is a great choice for large property applications. When you need to cover a large area, you need a high-capacity sprayer that is comfortable, powerful and fuel-efficient. With the SR 430 backpack sprayer, you can check off all those requirements and much more. This gasoline-powered liquid-only backpack sprayer delivers a large spraying range, reducing the time it takes you to treat large areas. Its high performance pressure pump provides a constant flow of product with no loss of pressure, regardless of the spray angle. While the engine is running, the pump also continuously mixes and agitates the tank contents, delivering a more consistent application of product. The sprayer is also comfortable to wear, featuring an anti-vibration system, soft rubber grips and optional chest and hip belt accessory to evenly distribute weight. The SR 430 is ideal for farmers, foresters and pest controllers.

Features:

• Adjustable Support Harness - STIHL® backpack blowers and sprayers are equipped with an adjustable support harness that distributes weight evenly across the shoulders and back, reducing user fatigue.
• Anti-Vibration System - The STIHL® anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Multi-Function Control Handle - Having easy access to all of the controls on one comfortable handle makes it easy to complete tasks so the operator’s hand never has to leave the handle.

Specifications:

• Power Source: Gas
• Weight: 27.3 lbs.
• Container Capacity: 3.7 gal. (gallons)
• Maximum Spray Range: 48 ft.
• Air Volume: 542 cfm (cubic feet per minute)
• Engine Power: 3.9 bhp (brake horsepower)
• Fuel Capacity: 57.5 oz. (ounces)
• Displacement: 63.3 cc (cubic centimeters)