Description:

The MS 261 chainsaw delivers low exhaust emissions, high fuel efficiency, and, of course, professional-grade performance. Its redesigned cylinder and ergonomic housing deliver a great power-to-weight ratio, weighing just 10.8 lbs. Designed for large volume cutting, the MS 261 also features the STIHL anti-vibration system for enhanced comfort. Other convenience features include a pre-separation air filtration system and a redesigned spiked bumper. Add the MS 261 to your jobsite today.

Features:

• Ematic™ Lubrication System - The Ematic™ guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
• STIHL ElastoStart™ - The ElastoStart™ starter handle is an exclusive feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• STIHL Quickstop® - STIHL chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• Adjustable Automatic Oiler - The Adjustable Automatic Oiler allows the user to adjust the lubricant of the guide bar and saw chain for different bar lengths and cutting conditions.
• Decompression Valve - The decompression valve, also referred to as 'deco' or 'deco valve', vents compression in the cylinder for easier starting. The decompression valve temporarily reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope. It is opened manually and closes automatically as soon as the engine fires.
• Pre-Separation Air Filtration System - This time-saving technology boosts the efficiency of the engine’s filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
• Side-Access Chain Tensioner - The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Master Control Lever™ - The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Anti-Vibration System - STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Toolless Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Throttle Trigger Lock - See it in action!
• Reduced-Emission Engine Technology—Caring for Nature - The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

Specification:

• Power Source: Gas
• Powerhead Weight: 10.8 lbs
• Guide Bar Length (Recommended): 16 in
• OILOMATIC® Chain: .325" RM3
• Chain Oil Capacity: 9.13 oz
• Engine Power: 4.0 bhp
• Fuel Capacity: 16.9 oz
• Displacement: 50.2 cc
• Intended Use: Professional

Description:

For all your tree felling, bucking, de-limbing, and other thinning operations, turn to the MS 362 chainsaw. With its reduced weight and large fuel capacity, this saw mixes great power with fuel efficiency. Its advanced engine technology reduces exhaust emissions to provide you with a dependable tool for the jobsite. The MS 362 also runs longer between filter cleaning and features a lifetime air filter that you do not need to replace—just keep clean. The MS 362 is a no-fuss, hardworking chainsaw that will satisfy any professional tree or forestry personnel as well as firewood cutters.

Features:

• STIHL ElastoStart™ - The ElastoStart™ starter handle is an exclusive feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• Decompression Valve - The decompression valve, also referred to as 'deco' or 'deco valve', vents compression in the cylinder for easier starting. The decompression valve temporarily reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope. It is opened manually and closes automatically as soon as the engine fires.
• Pre-Separation Air Filtration System - This time-saving technology boosts the efficiency of the engine’s filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
• Side-Access Chain Tensioner - The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Master Control Lever™ - The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Anti-Vibration System - STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Toolless Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Throttle Trigger Lock - See it in action!
• Reduced-Emission Engine Technology—Caring for Nature - The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

Specifications

• Power Source: Gas
• Powerhead Weight: 12.3 lbs
• Guide Bar Length (Recommended): 20 in
• OILOMATIC® Chain: 3/8" RS3
• Chain Oil Capacity: 11 oz
• Engine Power: 4.6 bhp
• Fuel Capacity: 20.3 oz
• Displacement: 59.0 cc
• Intended Use: Professional

Description:

This powerful, easy-to-use homeowner chainsaw is ideal for woodcutting tasks around the home.

The MS 182 is a powerful, easy-to-use homeowner chainsaw that gives you performance you can depend on. This chainsaw is equipped with toolless fuel and oil caps with retainers, offering a simple and convenient method to tighten and loosen oil caps without the use of tools. Featuring a Master Control Lever™ and an anti-vibration system, the MS 182 is designed to reduce fatigue while offering more control and maneuverability, making it the ideal tool for woodcutting tasks around the home.

Features:

1. STIHL Easy2Start™ (E): The Easy2Start™ system minimizes the effort required to start STIHL outdoor power tools, making the starting process almost effortless.
2. Diagnostic Socket: A convenient diagnostic socket allows a local STIHL Dealer to plug in the chainsaw and access information about operating time and diagnostic support.
3. IntelliCarb™ Compensating Carburetor: Automatically adjusts the air/fuel ratio to maintain the engine's correct RPM, even when the air filter becomes restricted or clogged.
4. Bumper Spikes: Prevent pull-in and provide better control during cutting, enhancing safety and ease of use.
5. STIHL OILOMATIC® Saw Chain: Specially engineered grooves channel oil to critical wear areas of the chain, improving longevity and performance.
6. Reduced Exhaust Emissions: Helps users minimize their impact on the environment by reducing exhaust emissions.
7. Front Hand Guard: Reduces the risk of injury during operation.
8. Rear Hand Guard: Provides additional protection and a wide area for foot placement during starting.
9. Translucent Fuel Tank: Allows operators to easily check the fuel level before starting work.
10. Easy-Access Air Filter Cover: Simplifies filter cleaning or replacement with its easy-to-remove design.
11. Anti-Vibration System: Minimizes vibration levels to reduce operator fatigue and provide a more comfortable working experience.
12. Spark Arrester Muffler: Large baffles reduce noise levels and contain a screen to reduce the emission of sparks.
13. Side-Access Chain Tensioner: Allows for convenient adjustment of the saw chain with a bar wrench, improving usability.
14. Throttle Trigger Lockout: A safety feature that must be depressed before the trigger can be activated, enhancing safety during operation.
15. High-Tech Polymer Housings: Lightweight, impact-resistant, and corrosion-resistant housings offer durability and reliability.

Specifications:

• Power Source: Gas
• Powerhead Weight: 10.1 lbs.
• Recommended Guide Bar Length: 16 in.
• OILOMATIC® Chain: 3/8" PM3
• Chain Oil Capacity: 9.5 oz.
• Engine Power: 2.1 bhp (brake horsepower)
• Fuel Capacity: 13.5 oz.
• Displacement: 35.8 cc (cubic centimeters)

Description:

The TS 410 is a lean, clean, cut-off machine that’s easy to use and easier to maintain. Just squeeze the trigger and watch its 12” cutting wheel grind through iron, steel, concrete, and expectations. Part of our STIHL Cutquik® series, this model features advanced filter technology that automatically handles daily maintenance. Its revolutionary X2 air filtration removes 99.96% of particles from air entering the carburetor and engine, making its onboard filters virtually maintenance free. Good thing we included an anti-vibration system to maximize comfort—a feature you’ll appreciate after a full day of cutting.

NOTE: Abrasive wheel included. Diamond wheel (shown) sold separately.

Features:

• Reduced-Emission Engine Technology—Caring for Nature - The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• X2 Air Filtration System - The X2 Air Filtration System revolutionizes the cut-off machine industry by allowing air filters to last up to a year, based on cutting conditions. Outside air enters the system in a swirling motion, removing 80% of dust particles. This pre-cleaned air is then routed through the primary and secondary air filters before being sent into the engine. The X2 Air Filtration System is virtually maintenance free and maintains an incredible 99.96% cleaning efficiency.
• Semi-Automatic Belt Tensioning - With consistent semi-automatic re-tensioning, this feature increases the service life of the belts and shaft bearings
• Bayonet-Style Filler Cap - Includes retainer for easy use, even with gloves on.
• Anti-Vibration System - STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• STIHL ElastoStart™ - The ElastoStart™ starter handle is a feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
• Ergonomic Grip - The ergonomic top-handle bar design provides an optimal comfortable grip in any working position.
• Water Connection - Water connection with shut-off valve and quick connector.

Specifications:

• Power Source: Gas
• Weight: 20.7 lbs.
• Maximum Cutting Depth: 3.9 in.
• Maximum Wheel Size: 12 in.
• Maximum Spindle Speed: 5,350 rpm
• Arbor Size: 0.79 in
• Engine Speed: 9,000 rpm
• Engine Power: 4.4 bhp (brake horsepower)
• Fuel Capacity: 24 oz.
• Displacement: 66.7 cc

Description:

The MS 271 FARM BOSS® is a mighty boss of a chainsaw. Loaded with features and technology, the FARM BOSS® starts with a highly efficient engine that delivers 20% longer run times between refueling while cutting exhaust emissions in half compared to the previous model. The pre-separation air filtration system is extraordinarily effective. Your air filter can last up to five times longer. All this STIHL® engineering in one compact, ergonomic design—now that’s high performance.

Features:

• Bumper Spikes: These spikes prevent pull-in and provide better control, making cutting easier.
• Toolless Fuel and Oil Caps with Retainers: Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Pre-Separation Air Filtration System: This time-saving technology boosts the efficiency of the engine’s filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
• Side-Access Chain Tensioner: The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Anti-Vibration System: STIHL® has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL® anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Master Control Lever™: The Master Control Lever™ is an easy-to-use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Throttle Trigger Interlock: This safety feature must be depressed before the trigger can be activated.
• High-Tech Polymer Housings: Housings are lightweight, withstand greater impact, and are corrosion-resistant.
• Powerful Low Exhaust Emission Engine: A powerful low exhaust emission engine saves users fuel and operating costs without losing the power they count on to get the job done.
• Made in America: A majority of STIHL® products sold in America are made in America of U.S. and global materials.

Specifications:

• Power Source: Gas
• Powerhead Weight: 12.3 lbs.
• Guide Bar Length (Recommended): 18 in.
• Chain Type: OILOMATIC® .325" RM3
• Chain Oil Capacity: 8.12 oz.
• Engine Power: 3.49 bhp (brake horsepower)
• Fuel Capacity: 16.9 oz.
• Displacement: 50.2 cc

Description:

The MS 271 FARM BOSS® is a mighty boss of a chainsaw. Loaded with features and technology, the FARM BOSS® starts with a highly efficient engine that delivers 20% longer run times between refuelings—while cutting exhaust emissions in half compared to the previous model. The pre-separation air filtration system is extraordinarily effective. Your air filter can last up to five times longer. All this STIHL® engineering in one compact, ergonomic design—now that’s high performance.

Features:

• Bumper Spikes: These spikes prevent pull-in and provide better control, making cutting easier.
• Toolless Fuel and Oil Caps with Retainers: Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Pre-Separation Air Filtration System: This time-saving technology boosts the efficiency of the engine’s filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
• Side-Access Chain Tensioner: The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Anti-Vibration System: STIHL® has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL® anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Master Control Lever™: The Master Control Lever™ is an easy-to-use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Throttle Trigger Interlock: This safety feature must be depressed before the trigger can be activated.
• High-Tech Polymer Housings: Housings are lightweight, withstand greater impact, and are corrosion-resistant.
• Powerful Low Exhaust Emission Engine: A powerful low exhaust emission engine saves users fuel and operating costs without losing the power they count on to get the job done.
• Made in America: A majority of STIHL® products sold in America are made in America of U.S. and global materials.

Specification:

• Power Source: Gas
• Powerhead Weight: 12.3 lbs.
• Guide Bar Length (Recommended): 18 in.
• Chain Type: OILOMATIC® .325" RM3
• Chain Oil Capacity: 8.12 oz.
• Engine Power: 3.49 bhp
• Fuel Capacity: 16.9 oz.
• Displacement: 50.2 cc

Description:

Give your home that professionally landscaped look with the STIHL FC 56 C-E edger. With its fuel-efficient, low exhaust emission STIHL engine, this edger powers through curbside annoyances like overgrown grass, thick weeds, and compacted soil. Thanks to its semi-automatic choke lever and Easy2Start™ system, starting the edger is easy —gently pull the cord and start defining your outdoor spaces. Its adjustable depth wheel even lets you select different cutting depths, so you can give your walkways, driveways, and areas of your property the perfect amount of definition.

Features:

• Reduced-Emission Engine Technology—Caring for Nature - The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.
• Made in America - A majority of STIHL products sold in America are made in America of U.S. and global materials.
• "Open" Guard Design - The professional “open” guard design helps minimize clogging, allowing for more efficient cutting.
• Skid Plate - All STIHL edgers come equipped with a skid plate to protect the gearbox during use.
• Adjustable Depth Wheel - The feature allows the user to easily adjust the wheel to the desired cutting depth for creating precision cuts.
• STIHL Easy2Start™ - The STIHL Easy2Start™ system makes starting STIHL outdoor power tools almost effortless, eliminating the need for a strong pull of the starting cord. This advanced starting system is designed to make starting STIHL products fast and easy. The specific system may vary by model, but in each case, a quick pull overcomes the engine’s compression to minimize the strength and effort required to start. Available on selected products.
• Stop Switch - With the Stop Switch, the equipment’s ignition is always ready for starting. Products with this feature shut off easily by pressing and holding down the switch. When the switch is released, it returns to the start position automatically, reducing the number of steps needed to start the product.

Specification:

• Power Source: Gas
• Weight: 13.5 lbs
• Shaft Design: Curved
• Blade Speed: 8,300 rpm (revolutions per minute)
• Gear Ratio: 1:1.24
• Arbor Size: 1 inch
• Blade Size: 8 inches
• Engine Power: 1.07 bhp (brake horsepower)
• Fuel Capacity: 11.5 oz (ounces)
• Displacement: 27.2 cc (cubic centimeters)
• Intended Use: Homeowner

Description:

As the first battery-powered edger in the STIHL AK Homeowner System, the FCA 80 brings the same exceptional power and performance as its gas-powered counterpart, the FC 56 C-E. With a curved shaft, loop-handle design and an adjustable depth wheel, this edger helps achieve a precise cut with ease and comfort. Equipped with a brushless motor, the FCA 80 is virtually maintenance free. With two speed levels, you can optimize performance based on your needs—reduce speed for extended run times or raise it for maximum power. Homeowners will enjoy adding this powerful precision tool to their yard care lineup.

Features:

Reduced-Emission Engine Technology - Caring for Nature

• The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

Made in America

• A majority of STIHL products sold in America are made in America of U.S. and global materials.

Adjustable depth wheel

• The adjustable depth wheel allows user to control the depth of the cut.

First battery-powered edger in the STIHL AK System

• The FCA 80 edger is a versatile addition to the STIHL AK System to give homeowners a wide range of battery-powered tool options.

Equivalent power to its FC 56 C-E gas counterpart

• The FCA 80 edger is built using the same durable components as its gas-powered FC 56 C-E counterpart, giving you equivalent power to get the job done.

Features a new loop handle design with quick adjustment

• The new loop handle design with quick release allows operators to easily customize their working position for optimal comfort and efficiency.

Two speed levels

• Two speed levels allow you to optimize performance. Use low speed for extended run times and less demanding jobs. Choose high speed for maximum performance.

Brushless Motor

• The advanced brushless motor virtually eliminates maintenance while supplying the power and performance you expect from STIHL.

Curved shaft

• The curved shaft features a lightweight design and high blade speed.

Specifications:

• Power Source: Battery
• Weight:
• Without battery: 10.8 lbs.
• With AK 30 battery: 13.7 lbs.
• Shaft Design: Curved
• Blade Speed: 8300 rpm (revolutions per minute)
• Gear Ratio: 1:1.24
• Battery System: AK System
• Run Time:
• With AK 30 battery: Up to 30 min.

Description:

Trim circles around other professional trimmers with the STIHL FS 111 RX trimmer. It provides 30% longer run times than the previous model to help get the job done quicker. It also saves users time with a simplified three-step start procedure. Through its semi-automatic choke lever and one-touch stop, the FS 111 RX allows users to turn off the engine with the simple press of a button. Thanks to its high-powered and low exhaust emission engine, this straight, hollow steel shaft trimmer is dependable and practical. Additionally, its loop handle makes for excellent maneuverability around landscaping obstacles. The FS 111 RX is the perfect choice for professionals with demanding trimming needs.

Features:

Reduced-Emission Engine Technology - Caring for Nature

• The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

Made in America

• A majority of STIHL products sold in America are made in America of U.S. and global materials.

Anti-Vibration System

• STIHL has a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.

Multi-Function Control Handle

• Having easy access to all of the controls on one comfortable handle makes it easy to complete tasks so the operator’s hand never has to leave the handle.

Loop Handle (R)

• Loop handle grass trimmers and brushcutters are ideal for trimming between bushes and shrubs and other areas where space is limited.

Upright Translucent Fuel Tank

• Allows operator to easily check fuel level before starting work. Upright position makes it easier to refill.

IntelliCarb™ Compensating Carburetor

• The IntelliCarb™ Compensating Carburetor measures the air pressure on the clean side of the air filter and adjusts the metering diaphragm in the carburetor. This keeps the RPM at a consistent level, even when the air filter begins to clog.

Purge Pump Primer

• By pressing the bulb, this small fuel pump delivers fuel to the carburetor, reducing the number of starting pulls needed after an extended break between uses.

Protected Spark Arrestor Muffler

• Has large baffles which reduce noise level and contains a screen designed to reduce the emission of sparks.

Protected Spark Plug

• Protected yet easy to change.

Heavy-Duty Steel-On-Steel Clutch

• Centrifugal clutch is designed to reduce slippage.

Protected or Enclosed Control Cables

• Eliminate dangling and loose wires.

Air Filter Cover

• Easily removed for fast and easy filter cleaning or replacement.

Throttle Trigger Interlock

• Must be depressed before the trigger can be activated.

Simplified Starting Procedure

• To get started, simply pump the fuel primer, set the choke and pull the starter cord. The built-in stop switch allows the user to turn off the engine with a simple press of the button.
• When the engine is off, the throttle lock automatically returns to the “start” setting. Your power tool will be ready to be started when you’re ready to get back to work.

Shoulder Strap / Carrying System

• Using a shoulder strap or carrying system helps distribute the weight of the equipment for increased operator comfort and improved maneuverability.

Adjustable front handle

• Adjusts for comfort.

Fully Lined Drive Shaft

• Provides smooth operation and less vibration.

High Tech Polymer Housing

• Housings are lightweight, withstand greater impact, and are corrosion-resistant.

Protected Choke Lever/Knob

• Helps prevent damage.

Straps and Harnesses

• They distribute the load from your hands to your shoulders. They also help reduce operator fatigue and make it easier to use trimmers, brush cutters and clearing saws for extended periods.

Trimmer Heads & Blades

• Many trimmer heads and blades are available. Find out which ones to use with this model in this chart. 

Specifications:

Power Source: Gas

Weight: 11 lbs

Cutting Width: 16.5 in

Engine Power: 1.4 bhp

Fuel Capacity: 24 oz

Displacement: 31.4 cc

Note: Weight displayed does not include cutting attachment or deflector.

Description:

The STIHL® FS 131 trimmer offers landscaping professionals a simplified and convenient solution for their trimming needs. Powered by a low exhaust emission, 36.3 cc engine and equipped with a larger fuel tank, this trimmer provides 30% longer run times than its predecessor, ensuring extended periods of uninterrupted operation. Its bike-handle design, featuring rubberized grips, enhances grasp and comfort, allowing for precise control during trimming tasks. With improved air filtration and STIHL®'s exclusive IntelliCarb™ technology, the FS 131 trimmer delivers exceptional performance and reliability. Moreover, its solid steel drive shaft accepts a wide range of heavy-duty cutting heads, including metal blades, making it versatile for various trimming applications.

Key Features:

• Straps and Harnesses: Distribute load from hands to shoulders, reducing operator fatigue and allowing for extended periods of use.
• TapAction™ AUTOCUT® Cutting Head: Easily adjust line length by tapping the cutting head against the ground, ensuring continuous and efficient trimming.
• IntelliCarb™ Compensating Carburetor: Maintains consistent RPM levels, even with a clogged air filter, ensuring optimal performance.
• Bike Handle: Enables smooth horizontal mowing action for covering large areas quickly and efficiently. Soft grips provide comfort and control, reducing operator fatigue.
• Start/Run/Stop Controls on Handle: Conveniently located controls for easy operation.
• Anti-Vibration System: Minimizes vibration levels, enhancing operator comfort during prolonged use.
• Shoulder Strap / Carrying System: Distributes weight for increased comfort and maneuverability.
• Tool-Free Handle Adjustment: Allows for easy adjustment without the need for tools, enhancing convenience during operation and storage.
• Multi-Function Control Handle: All controls located on one handle for ease of use and improved efficiency.
• Simplified Starting Procedure: Simple three-step starting procedure for quick and hassle-free operation.
• Protected Components: Spark arrestor muffler, spark plug, choke lever/knob, and control cables are protected to prevent damage.
• High-Tech Polymer Housing: Lightweight, impact-resistant, and corrosion-resistant housing ensures durability and longevity.
• Heavy-Duty Steel-On-Steel Clutch: Reduces slippage for reliable power transfer during trimming.
• Purge Pump Primer: Delivers fuel to the carburetor with a press of the bulb, reducing starting pulls after extended breaks.
• Upright Translucent Fuel Tank: Easily check fuel level and refill, minimizing downtime.

Specifications:

• Weight: 12.8 lbs.
• Power Source: Gas
• Cutting Width: 16.5 inches
• Engine Power: 1.9 bhp
• Fuel Capacity: 24 oz.
• Displacement: 36.3 cc

Description:

The STIHL FS 240 R professional trimmer combines a heavy-duty design with the versatility needed to handle a variety of challenging clearing situations. Providing 20% more fuel efficiency compared to the previous model, the low exhaust emission engine, combined with the large (25.4 oz.) fuel tank, means you’ll spend more time cutting and less time refueling. The FS 240 R is an ideal addition to any professional crew charged with cutting around ponds, along canals, in roadside ditches, and through heavy thickets.

Features:

• Tap Action™ AUTOCUT® Cutting Head - Tap Action™ allows users to adjust the line length simply by tapping the cutting head against the ground.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor measures the air pressure on the clean side of the air filter and adjusts the metering diaphragm in the carburetor. This keeps the RPM at a consistent level, even when the air filter begins to clog.
• Loop Handle (R) - Loop handle grass trimmers and brushcutters are ideal for trimming between bushes and shrubs and other areas where space is limited.
• Anti-Vibration System - STIHL has a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Multi-Function Control Handle - Having easy access to all of the controls on one comfortable handle makes it easy to complete tasks so the operator’s hand never has to leave the handle.
• Simplified Starting Procedure - To get started, users simply pump the fuel primer, set the choke, and pull the starter cord. The built-in stop switch allows the user to turn off the engine with a simple press of the button. When the engine is off, the throttle lock automatically returns to the "start" setting. The tool will be ready to start again when the user is ready to get back to work.
• Air Filter Cover - Easily remove the cover for fast and easy filter cleaning or replacement.
• Protected or Enclosed Control Cables - Dangling and loose wires are eliminated.
• Protected Spark Arrestor Muffler - Large baffles reduce noise level and contain a screen designed to reduce the emission of sparks.
• Protected Spark Plug - The spark plug is protected yet easy to change.
• Protected Choke Lever/Knob - The choke is protected to help prevent damage.
• High-Tech Polymer Housing - Housings are lightweight, withstand greater impact, and are corrosion-resistant.
• Heavy-Duty Steel-On-Steel Clutch - Centrifugal clutch is designed to reduce slippage.
• Purge Pump Primer - By pressing the bulb, this small fuel pump delivers fuel to the carburetor, reducing the number of starting pulls needed after an extended break between uses.
• Upright Translucent Fuel Tank - Easily check the fuel level before starting work. If fuel is needed, the upright position makes the tank easier to fill.
• Fully-Lined Drive Shaft - A lined shaft provides smooth operation and less vibration.
• Throttle Trigger Interlock - This safety feature must be depressed before the trigger can be activated.
• Reduced-Emission Engine Technology—Caring for Nature - The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

Specification:

• WEIGHT
• Weight: 14.6 lbs
• POWER SOURCE
• Power Source: Gas
• CUTTING WIDTH
• Cutting Width: 16.5 in
• ENGINE
• Engine Power: 2.3 bhp
• Displacement: 37.7 cc
• FUEL
• Fuel Capacity: 25.4 oz

Description:

Equipped with a simplified starting procedure, the FS 251 is a heavy-duty trimmer built for pros with no time to waste. Designed with a powerful low-exhaust-emission engine, the FS 251 saves users on fuel and operating costs without losing any of the power that they count on to get the job done. The FS 251’s easy-to-adjust bike handles provide comfort and ease while tackling widespread, overgrown areas. With a rugged design that offers optimal maneuverability and a vertically-pleated paper air filter that provides an extended service life, users can get to work quicker and count on the gas trimmer to last longer.

Features:

• Powerful Low Exhaust Emission Engine - A powerful low exhaust emission engine saves users fuel and operating costs without losing the power they count on to get the job done.
• STIHL ElastoStart™ - The ElastoStart™ starter handle is a feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
• TapAction™ AUTOCUT® Cutting Head - TapAction™ allows users to adjust the line length simply by tapping the cutting head against the ground.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor measures the air pressure on the clean side of the air filter and adjusts the metering diaphragm in the carburetor. This keeps the RPM at a consistent level, even when the air filter begins to clog.
• Bike Handle - When used in conjunction with a harness, the bike handle allows the machine to be easily guided, enabling a smooth horizontal mowing action to cover large areas quickly and efficiently. With soft grips for increased comfort, the bike handle provides greater control and helps reduce operator fatigue.
• Anti-Vibration System - STIHL has a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Shoulder Strap / Carrying System - Using a shoulder strap or carrying system helps distribute the weight of the equipment for increased operator comfort and improved maneuverability.
• Tool-Free Handle Adjustment - The central wing nut enables easy adjustment without the use of tools. For transportation and space-saving storage, the handle can be rotated 90°.
• Multi-Function Control Handle - Having easy access to all of the controls on one comfortable handle makes it easy to complete tasks so the operator’s hand never has to leave the handle.
• Semi-Automatic Choke Lever - The semi-automatic choke lever enables the simplified three-step start procedure, saving users time and allowing them to start jobs faster.
• Simplified Starting Procedure - To get started, users simply pump the fuel primer, set the choke, and pull the starter cord. The built-in stop switch allows the user to turn off the engine with a simple press of the button. When the engine is off, the throttle lock automatically returns to the "start" setting. The tool will be ready to start again when the user is ready to get back to work.
• Vertical Pleated Paper Air Filter - Thanks to better air filtration due to its greater surface area, the vertical pleated paper air filter can extend the time between servicing.
• Air Filter Cover - Easily remove the cover for fast and easy filter cleaning or replacement.
• Protected or Enclosed Control Cables - Dangling and loose wires are eliminated.
• Protected Spark Arrestor Muffler - Large baffles reduce noise level and contain a screen designed to reduce the emission of sparks.
• Protected Spark Plug - The spark plug is protected yet easy to change.
• Protected Choke Lever/Knob - The choke is protected to help prevent damage.
• High-Tech Polymer Housing - Housings are lightweight, withstand greater impact, and are corrosion-resistant.
• Heavy-Duty Steel-On-Steel Clutch - Centrifugal clutch is designed to reduce slippage.
• Purge Pump Primer - By pressing the bulb, this small fuel pump delivers fuel to the carburetor, reducing the number of starting pulls needed after an extended break between uses.
• Upright Translucent Fuel Tank - Easily check the fuel level before starting work. If fuel is needed, the upright position makes the tank easier to fill.
• Fully-Lined Drive Shaft - A lined shaft provides smooth operation and less vibration.
• Throttle Trigger Interlock - This safety feature must be depressed before the trigger can be activated.

Specifications:

• Weight: 15.2 lbs.
• Power Source: Gasoline
• Cutting Width: 16.5 in.
• Engine Power: 2.7 bhp (brake horsepower)
• Fuel Capacity: 25.4 oz. (ounces)
• Displacement: 41.6 cc (cubic centimeters)

Description:

For mowing tough grass. STIHL 4-point anti vibration system, STIHL Ergo Start, multi-function handle, bike handle, tool-free handle adjustment, 2-MIX engine, STIHL M-Tronic.

Specifications:

• Displacement: 37.7 cm³
• Power Output: 1.7 kW / 2.3 PS
• Weight: 8.5 kg
• Sound Levels:
• Sound Pressure Level (Plastic Tool): 99 dB(A)
• Sound Power Level (Metal Tool): 110 dB(A)
• Sound Power Level (Plastic Tool): 112 dB(A)
• Sound Pressure Level (Metal Tool): 98 dB(A)
• Vibration Levels:
• Left/Right (Plastic Tool): 2.5 / 2.2 m/s²
• Left/Right (Metal Tool): 2.2 / 2.0 m/s²
• Total Length: 179 cm
• Cutting Tool: Brush Knife 300-3

Description:

Designed for those seeking a great entry-level string trimmer at a value price, the FS 38 is ideal for homeowners. Weighing just 9.3 pounds, the lightweight design surprises users with a powerful output. Its high cutting speeds and 15" cutting width help complete trimming tasks in a short amount of time. Combined with optimized balance, an ergonomic loop handle, curved shaft, and low vibration, the FS 38 offers exceptional handling and maneuverability around landscaping obstacles.

Note: Not available for purchase or delivery in California.

Features:

• TapAction™ AUTOCUT® Cutting Head: Easily adjust line length by tapping the cutting head against the ground, ensuring continuous and efficient trimming.
• Loop Handle (R): Ideal for trimming between bushes and shrubs and other areas where space is limited, providing enhanced maneuverability and control.
• Air Filter Cover: Easily accessible for fast and hassle-free filter cleaning or replacement, ensuring optimal engine performance.
• Protected Spark Plug: Easily accessible for maintenance while being protected from damage during operation.
• Protected Choke Lever/Knob: Helps prevent damage to the choke mechanism, ensuring reliable starting and operation.
• High-Tech Polymer Housing: Lightweight, impact-resistant, and corrosion-resistant housing for durability and longevity.
• Heavy-Duty Steel-On-Steel Clutch: Centrifugal clutch design reduces slippage, ensuring efficient power transfer during operation.
• Purge Pump Primer: Delivers fuel to the carburetor with a press of the bulb, reducing the number of starting pulls needed after extended breaks.
• Upright Translucent Fuel Tank: Allows for easy fuel level monitoring and refilling, minimizing downtime.
• Fully-Lined Drive Shaft: Provides smooth operation and low vibration for enhanced comfort during use.
• Throttle Trigger Interlock: Ensures safety by requiring the depression of the interlock before activating the throttle trigger.

Specifications:

• Power Source: Gas
• Weight: 9.3 lbs.
• Cutting Width: 15 inches
• Engine Power: 0.87 bhp
• Fuel Capacity: 11.2 oz.
• Displacement: 27.2 cc

Description:

Fulfilling the demanding landscaper’s trimming needs, the STIHL® FS 91 R trimmer is the well-rounded choice for professionals. It features a low exhaust emission engine and large fuel tank which provides 30% longer run times than the previous model. With its rubberized loop handle, this straight-shaft trimmer delivers a comfortable grip, the maneuverability needed to navigate obstacles, and the power to get the job done. The FS 91 R trimmer also has a simplified three-step start procedure that saves users time and a superior air filter benefiting you in the long run.

Features:

• Reduced-Emission Engine Technology - Caring for Nature
• The STIHL® Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions.
• STIHL® Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.
• Made in America
• A majority of STIHL® products sold in America are made in America of U.S. and global materials.
• Shoulder Strap / Carrying System
• Using a shoulder strap or carrying system helps distribute the weight of the equipment for increased operator comfort and improved maneuverability.
• Adjustable Front Handle
• Adjusts for comfort.
• Fully Lined Drive Shaft
• Provides smooth operation and less vibration.
• High Tech Polymer Housing
• Housings are lightweight, withstand greater impact, and are corrosion-resistant.
• Protected Choke Lever/Knob
• Helps prevent damage.
• Throttle Trigger Interlock
• Must be depressed before the trigger can be activated.
• Air Filter Cover
• Easily removed for fast and easy filter cleaning or replacement.
• Protected or Enclosed Control Cables
• Eliminate dangling and loose wires.
• Heavy-Duty Steel-On-Steel Clutch
• Centrifugal clutch is designed to reduce slippage.
• Protected Spark Arrestor Muffler
• Has large baffles which reduce noise level and contains a screen designed to reduce the emission of sparks.
• Trimmer Heads & Blades
• Many trimmer heads and blades are available. Find out which ones to use with this model in this chart.
• Straps and Harnesses
• They distribute the load from your hands to your shoulders. They also help reduce operator fatigue and make it easier to use trimmers, brush cutters, and clearing saws for extended periods.

Specifications:

• Power Source: Gas
• Weight: 12.1 lbs.
• Cutting Width: 16.5 in.
• Engine Power: 1.27 bhp
• Fuel Capacity: 24.0 oz.
• Displacement: 28.4 cc

Note: Weight displayed does not include cutting attachment or deflector.

Description:

Meet the STIHL FS 111 R trimmer, the ultimate solution for demanding landscaping tasks requiring power and endurance. Engineered with a robust low exhaust emission engine, this trimmer offers 30% longer run times compared to its predecessor, ensuring sustained efficiency during prolonged operation. Designed for professional use, the FS 111 R features a user-friendly three-step start procedure, streamlining the start-up process for enhanced productivity. With a vertical pleated paper air filter extending service intervals and a rubberized loop handle for comfortable grip, this trimmer is poised to tackle diverse cutting challenges with ease.

Key Features:

• Reduced-Emission Engine Technology: Recognized by the STIHL Inc. "Caring for Nature" seal, this trimmer boasts environmentally conscious engineering with zero or low exhaust emissions, exceeding EPA and/or CARB standards.
• Anti-Vibration System: STIHL's anti-vibration system minimizes handheld equipment vibration levels, reducing operator fatigue and enhancing overall comfort during extended use.
• Made in America: Proudly manufactured in the USA, the majority of STIHL products are crafted using both domestic and global materials, ensuring quality and reliability.
• IntelliCarb™ Compensating Carburetor: This innovative carburetor adjusts the metering diaphragm based on air pressure, ensuring consistent RPM levels even as the air filter accumulates debris.
• Shoulder Strap / Carrying System: Distributes equipment weight for improved operator comfort and maneuverability during operation.
• Purge Pump Primer: Facilitates quick starting after extended periods of non-use by delivering fuel to the carburetor with a simple press of the bulb.
• Multi-Function Control Handle: All controls are conveniently located on one handle, eliminating the need for the operator's hand to leave the handle during operation, enhancing efficiency and ease of use.
• Adjustable Front Handle: Provides customizable ergonomic comfort, accommodating different user preferences.
• Fully Lined Drive Shaft: Ensures smooth operation and minimizes vibration, enhancing overall user comfort and control.
• High Tech Polymer Housing: Lightweight, impact-resistant, and corrosion-resistant housing ensures durability and longevity in demanding work environments.
• Protected Choke Lever/Knob: Guards against damage, ensuring reliable performance and longevity.
• Throttle Trigger Interlock: Requires depression before trigger activation, enhancing safety during operation.
• Air Filter Cover: Easily removable for fast cleaning or replacement, ensuring optimal engine performance and longevity.
• Protected or Enclosed Control Cables: Prevents loose wires, enhancing safety and convenience during operation.
• Heavy-Duty Steel-On-Steel Clutch: Engineered to minimize slippage, ensuring reliable power transmission during operation.
• Protected Spark Plug: Easily accessible yet safeguarded, facilitating maintenance and ensuring consistent ignition performance.
• Protected Spark Arrestor Muffler: Reduces noise and sparks emission, enhancing overall safety and compliance.
• Upright Translucent Fuel Tank: Allows for easy fuel level checks and refills, ensuring uninterrupted operation during tasks.

Specifications:

• Power Source: Gas
• Weight: 12.1 lbs. (excluding cutting attachment or deflector)
• Cutting Width: 16.5 in.
• Engine Power: 1.4 bhp (brake horsepower)
• Fuel Capacity: 24 oz.
• Displacement: 31.4 cc