Description:

When you rely on firewood to keep your home warm and cozy, you need a good chainsaw to build a solid woodpile. With an exceptional power-to-weight ratio, the STIHL® MS 250 is up to the job. It's easy to use and combines great features to tackle clearing or cleanup tasks, as well as cut through small limbs and trees. For many years, the MS 250 has been a customer favorite, a model of efficiency and reliability that brings incredible performance every time.

Features:

• Easy-access air filter cover to remove for fast and easy filter cleaning or replacement
• Rear hand guard reduces the risk of injury as well as provides a wide area for foot placement during starting
• Master Control Lever™ is a single lever operating the choke, starting throttle lock, and on-off switch
• The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw
• Tool-less fuel and oil caps with retainers: Simply lift the lever and twist the caps to remove or tighten
• The winter/summer shutter allows the carburetor to operate at optimum temperature year-round and helps to prevent carburetor icing when working below 50°F (10°C)
• Front handle is designed for a secure grip and ergonomically angled for comfort
• Smooth clean design has no rough edges to snag on clothing or brush

Specifications:

• Power Source: Gas
• Powerhead Weight: 10.1 lbs.
• Guide Bar Length (Recommended): 18 in.
• OILOMATIC® Chain: .325" RM3
• Chain Oil Capacity: 6.8 oz.
• Engine Power: 3.0 bhp
• Fuel Capacity: 15.9 oz.
• Displacement: 45.4 cc
• Intended Use: Homeowner

Description:

The STIHL® MS 251 WOOD BOSS® chainsaw is designed to deliver all the power you would expect from STIHL® equipment yet with a comfortable and ergonomic design. The MS 251 WOOD BOSS® is perfect for felling small trees, pruning and thinning and cutting firewood simply and efficiently. With up to 20 percent fuel savings and 50 percent reduced emissions (as compared to previous models), you can enjoy a longer run time while feeling good about your impact on the environment. Features like a master control lever and reduced vibration make the STIHL® MS 251 WOOD BOSS® a lean, easy-to-use machine that still packs plenty of power.

Features:

• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• Toolless Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Anti-Vibration System - STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Master Control Lever™ - The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Throttle Trigger Lockout - This safety feature must be depressed before the trigger can be activated.
• High-Tech Polymer Housings - Housings are lightweight, withstand greater impact, and are corrosion-resistant.
• Made in America - A majority of STIHL products sold in America are made in America of U.S. and global materials.

Specifications:

• Power Source: Gas
• Powerhead Weight: 11.0 lbs
• Guide Bar Length (Recommended): 18 in
• Chain Type: .325" RM3 (OILOMATIC®)
• Chain Oil Capacity: 6.7 oz
• Engine Power: 3.0 bhp
• Fuel Capacity: 13.2 oz
• Displacement: 45.6 cc
• Intended Use: Homeowner

Description:

The MS 261 chainsaw delivers low exhaust emissions, high fuel efficiency, and, of course, professional-grade performance. Its redesigned cylinder and ergonomic housing deliver a great power-to-weight ratio, weighing just 10.8 lbs. Designed for large volume cutting, the MS 261 also features the STIHL® anti-vibration system for enhanced comfort. Other convenience features include a pre-separation air filtration system and a redesigned spiked bumper. Add the MS 261 to your jobsite today.

Features:

• Ematic™ Lubrication System – The Ematic™ guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
• STIHL ElastoStart™ – The ElastoStart™ starter handle is an exclusive feature of STIHL®. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
• IntelliCarb™ Compensating Carburetor – The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• STIHL Quickstop® – STIHL® chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
• Bumper Spikes – These spikes prevent pull-in and provide better control, making cutting easier.
• Adjustable Automatic Oiler – The Adjustable Automatic Oiler allows the user to adjust the lubricant of the guide bar and saw chain for different bar lengths and cutting conditions.
• Decompression Valve – The decompression valve, also referred to as 'deco' or 'deco valve', vents compression in the cylinder for easier starting. The decompression valve temporarily reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope. It is opened manually and closes automatically as soon as the engine fires.
• Pre-Separation Air Filtration System – This time-saving technology boosts the efficiency of the engine’s filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
• Side-Access Chain Tensioner – The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Master Control Lever™ – The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Anti-Vibration System – STIHL® has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL® anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Toolless Fuel and Oil Caps with Retainers – Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Throttle Trigger Lock – See it in action!

Specification:

• Power Source: Gas
• Powerhead Weight: 10.8 lbs
• Recommended Guide Bar Length: 18 in
• Chain Type: .325" RM3 (OILOMATIC®)
• Chain Oil Capacity: 9.5 oz
• Engine Power: 4.0 bhp
• Fuel Capacity: 13.5 oz
• Displacement: 38.6 cc
• Intended Use: Professional

Description:

The MS 261 chainsaw delivers low exhaust emissions, high fuel efficiency, and, of course, professional-grade performance. Its redesigned cylinder and ergonomic housing deliver a great power-to-weight ratio, weighing just 10.8 lbs. Designed for large volume cutting, the MS 261 also features the STIHL® anti-vibration system for enhanced comfort. Other convenience features include a pre-separation air filtration system and a redesigned spiked bumper. Add the MS 261 to your jobsite today.

Features:

• Ematic™ Lubrication System – The Ematic™ guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
• STIHL ElastoStart™ – The ElastoStart™ starter handle is an exclusive feature of STIHL®. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
• IntelliCarb™ Compensating Carburetor – The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• STIHL Quickstop® – STIHL® chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
• Bumper Spikes – These spikes prevent pull-in and provide better control, making cutting easier.
• Adjustable Automatic Oiler – The Adjustable Automatic Oiler allows the user to adjust the lubricant of the guide bar and saw chain for different bar lengths and cutting conditions.
• Decompression Valve – The decompression valve, also referred to as 'deco' or 'deco valve', vents compression in the cylinder for easier starting. The decompression valve temporarily reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope. It is opened manually and closes automatically as soon as the engine fires.
• Pre-Separation Air Filtration System – This time-saving technology boosts the efficiency of the engine’s filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
• Side-Access Chain Tensioner – The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Master Control Lever™ – The Master Control Lever™ is an easy-to-use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Anti-Vibration System – STIHL® has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL® anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Toolless Fuel and Oil Caps with Retainers – Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.

SPECIFICATIONS

• Power Source: Gas
• Powerhead Weight: 10.8 lbs
• Recommended Guide Bar Length: 18 in
• Chain Type: .325" RM3 (OILOMATIC®)
• Chain Oil Capacity: 9.5 oz
• Engine Power: 4.0 bhp
• Fuel Capacity: 13.5 oz
• Displacement: 38.6 cc
• Intended Use: Professional

Note:

STIHL recommends:

• Chain: #3695 (23 RM3 67) OILOMATIC®
• Guide Bar: 16" (3003 000 3313 Ematic™)
• Compatible Bar Range: 16" – 20"

Description;

The STIHL® MS 261 chainsaw delivers low exhaust emissions, high fuel efficiency, and professional-grade performance. Its redesigned cylinder and ergonomic housing provide an excellent power-to-weight ratio, weighing just 10.8 lbs. Designed for high-volume cutting, the MS 261 also features the STIHL® anti-vibration system for enhanced comfort.

Additional convenience features include a pre-separation air filtration system and a redesigned spiked bumper for improved cutting precision. Experience the performance and efficiency of the MS 261 on your jobsite today.

Features:

• Ematic™ Lubrication System – The Ematic™ guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
• STIHL ElastoStart™ – The ElastoStart™ starter handle is an exclusive feature of STIHL®. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
• IntelliCarb™ Compensating Carburetor – The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in airflow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• STIHL Quickstop® – STIHL® chainsaws are equipped with a chain-stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
• Bumper Spikes – These spikes prevent pull-in and provide better control, making cutting easier.
• Adjustable Automatic Oiler – The Adjustable Automatic Oiler allows the user to adjust the lubricant of the guide bar and saw chain for different bar lengths and cutting conditions.
• Decompression Valve – The decompression valve, also referred to as 'deco' or 'deco valve,' vents compression in the cylinder for easier starting. The decompression valve temporarily reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope. It is opened manually and closes automatically as soon as the engine fires.
• Pre-Separation Air Filtration System – This time-saving technology boosts the efficiency of the engine’s filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
• Side-Access Chain Tensioner – The Side-Access Chain Tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Master Control Lever™ – The Master Control Lever™ is an easy-to-use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Anti-Vibration System – STIHL® has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL® anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Toolless Fuel and Oil Caps with Retainers – Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Throttle Trigger Lock –
• Reduced-Emission Engine Technology—Caring for Nature – The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

Specifications:

• Power Source: Gas
• Powerhead Weight: 10.8 lbs.
• Guide Bar Length (Recommended): 16 in.
• Oilomatic® Chain: .325" RM3
• Chain Oil Capacity: 9.13 oz.
• Engine Power: 4.0 bhp
• Fuel Capacity: 16.9 oz.
• Displacement: 50.2 cc
• Intended Use: Professional

DESCRIPTION:

The STIHL® MS 261 C-M petrol chainsaw is the perfect tool for small to medium tree maintenance work. This new version features a newly designed STIHL ROLLOMATIC® Light 04 guide bar as well as the new .325” RS Pro saw chain for improved cutting performance. The high-performance .325” saw chain provides up to 20% more cutting performance compared to its predecessor (.325” RS) due to the narrower kerf. This light and well-balanced saw delivers plenty of power, whilst the STIHL M-Tronic™ technology controls the fuel and air mix at all times so the machine is always at optimum performance. The STIHL® anti-vibration system significantly reduces vibrations at the handles for comfortable use of this petrol chainsaw throughout your working day.

The MS 261 C-M is a versatile, professional petrol chainsaw allowing you to run a selection of different bar lengths to suit your needs. It also includes useful features such as the easy-clean HD2 filter, adjustable oil delivery to the bar and chain, stainless steel muffler, and captive nuts on the sprocket cover. The STIHL 2-MIX™ technology in the MS 261 C-M petrol chainsaw ensures up to 20% less fuel consumption and up to 50% less emissions compared to the equivalent STIHL® two-stroke engines without 2-MIX™ technology.

FEATURES:

• RELIABLE WORK WITH THE BEST PERFORMANCE.
• With STIHL M-Tronic™, you’ll have the best performance from your work tool from the outset. Fully electronic engine management regulates the ignition timing and fuel metering in all work situations, taking into account external conditions such as temperature, altitude, and fuel quality.
• STIHL M-Tronic™
• The HD2 filter is made from polyethylene filter material with up to 70% finer pores than fleece and polyamide filters to trap even very fine dust. In addition, it is oil and water-repellent and thus very easy to clean. The PET-covered filter cartridge with quick-release lock enables the filter to be assembled and disassembled in next to no time, without using tools.
• HD2 filter for the MS 261
• EFFORTLESS START-UP.
• The decompression valve makes it easier to start your tool. When starting, you can allow some of the compressed mixture to escape from the cylinder by opening the valve. This protects the start-up system and reduces the amount of force required on the starter cord.
• Decompression valve
• Allows a precise, demand-based delivery of oil. It's possible to reduce oil production by up to 50% in the E position. For very long cutting attachments or very dry wood, an additional volume of oil can be added by the user. Similar to illustration.
• Controlled-delivery oil pump

SPECIFICATION:

• Bar Length: 35-45 cm
• Bar Length (Inches): 14-18"
• Displacement: 50.2 cm³
• Power Output: 3 kW / 4.1 HP
• Weight (Excluding Cutting Equipment): 4.9 kg (1)
• Power-to-Weight Ratio: 1.6 kg/kW
• Weight (Varied): 5.68 / 5.8 / 5.92 kg (2)
• Length (With Bumper Strike): 448 mm
• Sound Pressure Level: 105 dB(A) (3)
• Sound Power Level: 116 dB(A) (3)
• Vibration Values (Left/Right): 3.5 / 3.5 m/s² (4)
• Saw Chain Pitch: .325"
• CO₂ Emissions: 705 g/kWh

Description:

The MS 261 C-M has all the same great features as the MS 261—low exhaust emissions, high fuel efficiency and robust performance—but also features the advanced STIHL M-Tronic™ engine management system. The STIHL M-Tronic™ onboard microprocessor digitally monitors and automatically compensates for changes in your work conditions, including elevation, temperature, fuel quality, varying octane levels, and dirty filters. The end result is maximum performance across a wide range of cutting conditions without making any manual adjustments. The MS 261 C-M also features redesigned cylinders and a slimmer, ergonomic housing for an impressive power-to-weight ratio.

Features:

• STIHL M-Tronic™ – This product features M-Tronic™ (M) – a new generation of Intelligent Engine Management that eliminates the low and high speed carburetor adjustment screws, compensates for dirty air filter and changes in elevation and fuel quality for optimum engine power at all times.
• Ematic™ Lubrication System – The Ematic™ guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
• STIHL ElastoStart™ – The ElastoStart™ starter handle is an exclusive feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
• IntelliCarb™ Compensating Carburetor – The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• STIHL Quickstop® – STIHL chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
• Bumper Spikes – These spikes prevent pull-in and provide better control, making cutting easier.
• Adjustable Automatic Oiler – The Adjustable Automatic Oiler allows the user to adjust the lubricant of the guide bar and saw chain for different bar lengths and cutting conditions.
• Decompression Valve – The decompression valve, also referred to as 'deco' or 'deco valve', vents compression in the cylinder for easier starting. The decompression valve temporarily reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope. It is opened manually and closes automatically as soon as the engine fires.
• Pre-Separation Air Filtration System – This time-saving technology boosts the efficiency of the engine’s filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
• Side-Access Chain Tensioner – The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Master Control Lever™ – The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Anti-Vibration System – STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Toolless Fuel and Oil Caps with Retainers – Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Throttle Trigger Lock – See it in action!
• Reduced-Emission Engine Technology—Caring for Nature – The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

Specifications:

• Power Source: Gas
• Powerhead Weight: 10.8 lbs.
• Guide Bar Length (Recommended): 16 in.
• OILOMATIC® Chain: .325" RM3
• Chain Oil Capacity: 9.13 oz.
• Engine Power: 4.0 bhp (brake horsepower)
• Fuel Capacity: 16.9 oz.
• Displacement: 50.2 cc

Description:

The MS 261 C-M has all the same great features as the MS 261—low exhaust emissions, high fuel efficiency and robust performance—but also features the advanced STIHL® M-Tronic™ engine management system. The STIHL® M-Tronic™ onboard microprocessor digitally monitors and automatically compensates for changes in your work conditions, including elevation, temperature, fuel quality, varying octane levels, and dirty filters. The end result is maximum performance across a wide range of cutting conditions without making any manual adjustments. The MS 261 C-M also features redesigned cylinders and a slimmer, ergonomic housing for an impressive power-to-weight ratio.

Features:

• STIHL® M-Tronic™ - This product features M-Tronic™ (M) - a new generation of Intelligent Engine Management that eliminates the low and high speed carburetor adjustment screws, compensates for dirty air filter and changes in elevation and fuel quality for optimum engine power at all times.
• Ematic™ Lubrication System - The Ematic™ guide bar, when used with STIHL® OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
• STIHL® ElastoStart™ - The ElastoStart™ starter handle is an exclusive feature of STIHL®. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• STIHL® Quickstop® - STIHL® chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL® Quickstop® chain brake. The STIHL® Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• Adjustable Automatic Oiler - The Adjustable Automatic Oiler allows the user to adjust the lubricant of the guide bar and saw chain for different bar lengths and cutting conditions.
• Decompression Valve - The decompression valve, also referred to as 'deco' or 'deco valve', vents compression in the cylinder for easier starting. The decompression valve temporarily reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope. It is opened manually and closes automatically as soon as the engine fires.
• Pre-Separation Air Filtration System - This time-saving technology boosts the efficiency of the engine’s filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
• Side-Access Chain Tensioner - The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Master Control Lever™ - The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Anti-Vibration System - STIHL® has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Tool less Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Throttle Trigger Lock - See it in action!
• Reduced-Emission Engine Technology—Caring for Nature - The STIHL® Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL® Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

Specifications:

• Power Source: Gas
• Powerhead Weight: 10.8 lbs.
• Guide Bar Length (Recommended): 16 in.
• OILOMATIC® Chain: .325" RM3
• Chain Oil Capacity: 9.13 oz.
• Engine Power: 4.0 bhp (brake horsepower)
• Fuel Capacity: 16.9 oz.
• Displacement: 50.2 cc

Description:

The MS 271 FARM BOSS® is a mighty boss of a chainsaw. Loaded with features and technology, the FARM BOSS® starts with a highly efficient engine that delivers 20% longer run times between refuelings while cutting exhaust emissions in half compared to the previous model. The pre-separation air filtration system is extraordinarily effective. Your air filter can last up to five times longer. All this STIHL® engineering in one compact, ergonomic design now that's high performance.

Features:

• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• Toolless Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There's no need to use a tool to tighten or loosen.
• Pre-Separation Air Filtration System - This time-saving technology boosts the efficiency of the engine's filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
• Side-Access Chain Tensioner - The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Anti-Vibration System - STIHL® has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL® anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Master Control Lever™ - The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Throttle Trigger Interlock - This safety feature must be depressed before the trigger can be activated.
• High-Tech Polymer Housings - Housings are lightweight, withstand greater impact, and are corrosion-resistant.
• Powerful Low Exhaust Emission Engine - A powerful low exhaust emission engine saves users fuel and operating costs without losing the power they count on to get the job done.
• Made in America - A majority of STIHL® products sold in America are made in America of U.S. and global materials.

Specifications:

• Power Source: Gas
• Powerhead Weight: 12.3 lbs.
• Guide Bar Length (Recommended): 18 in.
• Oilomatic® Chain: .325" RM3
• Chain Oil Capacity: 8.12 oz.
• Engine Power: 3.49 bhp
• Fuel Capacity: 16.9 oz.
• Displacement: 50.2 cc

Description:

The MS 271 FARM BOSS® is a mighty boss of a chainsaw. Loaded with features and technology, the FARM BOSS® starts with a highly efficient engine that delivers 20% longer run times between refuelings—while cutting exhaust emissions in half compared to the previous model. The pre-separation air filtration system is extraordinarily effective. Your air filter can last up to five times longer. All this STIHL® engineering in one compact, ergonomic design—now that’s high performance.

Features:

• Bumper Spikes: These spikes prevent pull-in and provide better control, making cutting easier.
• Toolless Fuel and Oil Caps with Retainers: Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Pre-Separation Air Filtration System: This time-saving technology boosts the efficiency of the engine’s filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
• Side-Access Chain Tensioner: The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Anti-Vibration System: STIHL® has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL® anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Master Control Lever™: The Master Control Lever™ is an easy-to-use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Throttle Trigger Interlock: This safety feature must be depressed before the trigger can be activated.
• High-Tech Polymer Housings: Housings are lightweight, withstand greater impact, and are corrosion-resistant.
• Powerful Low Exhaust Emission Engine: A powerful low exhaust emission engine saves users fuel and operating costs without losing the power they count on to get the job done.
• Made in America: A majority of STIHL® products sold in America are made in America of U.S. and global materials.

Specification:

• Power Source: Gas
• Powerhead Weight: 12.3 lbs.
• Guide Bar Length (Recommended): 18 in.
• Chain Type: OILOMATIC® .325" RM3
• Chain Oil Capacity: 8.12 oz.
• Engine Power: 3.49 bhp
• Fuel Capacity: 16.9 oz.
• Displacement: 50.2 cc

Description:

The MS 271 FARM BOSS® is a mighty boss of a chainsaw. Loaded with features and technology, the FARM BOSS® starts with a highly efficient engine that delivers 20% longer run times between refueling while cutting exhaust emissions in half compared to the previous model. The pre-separation air filtration system is extraordinarily effective. Your air filter can last up to five times longer. All this STIHL® engineering in one compact, ergonomic design—now that’s high performance.

Features:

• Bumper Spikes: These spikes prevent pull-in and provide better control, making cutting easier.
• Toolless Fuel and Oil Caps with Retainers: Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Pre-Separation Air Filtration System: This time-saving technology boosts the efficiency of the engine’s filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
• Side-Access Chain Tensioner: The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Anti-Vibration System: STIHL® has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL® anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Master Control Lever™: The Master Control Lever™ is an easy-to-use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Throttle Trigger Interlock: This safety feature must be depressed before the trigger can be activated.
• High-Tech Polymer Housings: Housings are lightweight, withstand greater impact, and are corrosion-resistant.
• Powerful Low Exhaust Emission Engine: A powerful low exhaust emission engine saves users fuel and operating costs without losing the power they count on to get the job done.
• Made in America: A majority of STIHL® products sold in America are made in America of U.S. and global materials.

Specifications:

• Power Source: Gas
• Powerhead Weight: 12.3 lbs.
• Guide Bar Length (Recommended): 18 in.
• Chain Type: OILOMATIC® .325" RM3
• Chain Oil Capacity: 8.12 oz.
• Engine Power: 3.49 bhp (brake horsepower)
• Fuel Capacity: 16.9 oz.
• Displacement: 50.2 cc

Description:

Another high-tech STIHL® chainsaw, the MS 291 is built around a fuel-saving engine with long run times and low exhaust emissions. The advanced pre-separation air filtration system perceptibly relieves the downstream filter components, increasing the life of your air filter. Another great comfort feature is an anti-vibration system to provide you with a more comfortable working experience. It is truly a force to be reckoned with.

Features:

• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• Toolless Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Pre-Separation Air Filtration System - This time-saving technology boosts the efficiency of the engine’s filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
• Side-Access Chain Tensioner - The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Anti-Vibration System - STIHL® has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL® anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Master Control Lever™ - The Master Control Lever™ is an easy-to-use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Throttle Trigger Lockout - This safety feature must be depressed before the trigger can be activated.
• High-Tech Polymer Housings - Housings are lightweight, withstand greater impact, and are corrosion-resistant.
• Powerful, Yet Lightweight - Built for lightweight durability and packed with features, this powerful chainsaw is ideal for frequent use and tasks around the home.
• Made in America - A majority of STIHL® products sold in America are made in America of U.S. and global materials.

Specifications:

• Power Source: Gas
• Powerhead Weight: 12.3 lbs.
• Guide Bar Length (Recommended): 18 in.
• OILOMATIC® Chain: .325 RM3
• Chain Oil Capacity: 8.12 oz.
• Engine Power: 3.76 bhp (brake horsepower)
• Fuel Capacity: 16.9 oz.
• Displacement: 55.5 cc

Description:

Durable 2.8kW petrol chainsaw is a practical all-rounder for farmers, landscapers and gardeners. With the economical 2-MIX™ engine, fuel consumption is reduced by up to 20% and emissions are cut by up to 50%. Featuring STIHL®'s long-life air filter system with pre-separation and professional anti-vibration technology, the MS 291 sets a new standard for this type of saw.

Specifications:

• Bar Length: 40-45 cm (16-18 inches)
• Displacement: 56 cm³
• Power Output: 2.8 kW / 3.8 HP
• Weight: 5.6 kg (1) or 6.64 / 6.87 kg (2)
• Power-to-Weight Ratio: 2 kg/kW
• Sound Pressure Level: 103 dB(A) (3)
• Sound Power Level: 116 dB(A) (3)
• Vibration Values (Left/Right): 4.5/4.5 m/s² (4)
• Saw Chain Pitch: .325 "
• CO₂ Emissions: 841 g/kWh

Description:

The MS 311 is a high-tech workhorse with low fuel consumption and reduced exhaust emissions. This powerful saw is ideal for large properties, farms, and ranches. It offers several comfort features, such as a side-access chain tensioner, an advanced anti-vibration system, and toolless fuel and oil caps with retainers. The MS 311 also has large fuel and oil tanks for extended use. With STIHL® advanced engine technology, you get higher fuel economy and longer run times. You’ll stay productive while you’re saving money on fuel. With fuel-efficiency and a high-powered engine, the MS 311 will help reduce your downtime on the job—so you can enjoy your own downtime when the job is done.

Features:

• Powerful Low Exhaust Emission Engine - A powerful low exhaust emission engine saves users fuel and operating costs without losing the power they count on to get the job done.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• Decompression Valve - The decompression valve, also referred to as 'deco' or 'deco valve', vents compression in the cylinder for easier starting. The decompression valve temporarily reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope. It is opened manually and closes automatically as soon as the engine fires.
• Toolless Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Pre-Separation Air Filtration System - This time-saving technology boosts the efficiency of the engine’s filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
• Side-Access Chain Tensioner - The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Anti-Vibration System - STIHL® has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL® anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Master Control Lever™ - The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Throttle Trigger Interlock - This safety feature must be depressed before the trigger can be activated.
• High-Tech Polymer Housings - Housings are lightweight, durable, and corrosion resistant.

Specifications:

• Type: Gas
• Weight: 13.7 lbs
• Bar Length: 18" (recommended)
• Chain: 3/8" RS3
• Oil Capacity: 11.8 oz
• Power: 4.2 HP
• Fuel Capacity: 20.3 oz
• Engine Size: 59cc
• Best For: Farm & ranch work

Description:

The STIHL MS 311 is a powerful, fuel-efficient chainsaw designed for large properties, farms, and ranches. Equipped with advanced engine technology, it offers high fuel economy and reduced exhaust emissions for extended use. Comfort features include a side-access chain tensioner, advanced anti-vibration system, and toolless fuel and oil caps with retainers for easy refueling. The saw’s large fuel and oil tanks provide longer run times, helping you stay productive and reduce downtime. With its fuel efficiency and high-powered engine, the MS 311 ensures you can get the job done and still enjoy your own downtime.

Features:

• Powerful Low Exhaust Emission Engine: Delivers exceptional fuel efficiency while maintaining the power needed for tough jobs, helping reduce operating costs without sacrificing performance.
• IntelliCarb™ Compensating Carburetor: Automatically adjusts the air/fuel ratio when the air filter becomes clogged, maintaining engine performance and RPM. Unlike standard carburetors, IntelliCarb™ uses air from the clean side of the air filter, providing more consistent power.
• Bumper Spikes: Designed to prevent pull-in and improve control, making cutting more efficient and stable.
• Decompression Valve: Eases starting by reducing compression during cranking, requiring less effort to pull the starter rope. It opens manually and automatically closes when the engine starts.
• Toolless Fuel and Oil Caps with Retainers: Simplifies refueling with easy-to-remove caps that don't require tools, improving convenience and efficiency.
• Pre-Separation Air Filtration System: Enhances engine efficiency by separating heavier dirt particles before they reach the air filter, extending the time between air filter cleanings.
• Side-Access Chain Tensioner: Allows for easy chain adjustments with a bar wrench, offering added convenience over traditional models.
• Anti-Vibration System: Reduces operator fatigue by minimizing vibrations, providing a smoother and more comfortable working experience.
• Master Control Lever™: Combines choke, throttle lock, and on/off switch in one lever for simplified operation, ensuring ease of use.
• Throttle Trigger Interlock: Enhances safety by requiring the interlock to be pressed before the trigger can be activated, preventing accidental starts.
• High-Tech Polymer Housings: Lightweight yet durable and corrosion-resistant, offering a long-lasting, reliable tool.

Specifications:

• Type: Gas-powered
• Engine: 59cc (4.2 HP)
• Weight: 13.7 lbs
• Bar Length: 16" (recommended)
• Chain: 3/8" RS3 OILOMATIC®
• Fuel Capacity: 20.3 oz
• Oil Capacity: 11.8 oz
• Use: Heavy-duty farm/ranch work

Description:

For all your tree felling, bucking, de-limbing, and other thinning operations, turn to the MS 362 chainsaw. With its reduced weight and large fuel capacity, this saw mixes great power with fuel efficiency. Its advanced engine technology reduces exhaust emissions to provide you with a dependable tool for the jobsite. The MS 362 also runs longer between filter cleaning and features a lifetime air filter that you do not need to replace—just keep clean. The MS 362 is a no-fuss, hardworking chainsaw that will satisfy any professional tree or forestry personnel as well as firewood cutters.

Features:

• STIHL® ElastoStart™ - The ElastoStart™ starter handle is an exclusive feature of STIHL®. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• Decompression Valve - The decompression valve, also referred to as 'deco' or 'deco valve', vents compression in the cylinder for easier starting. The decompression valve temporarily reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope. It is opened manually and closes automatically as soon as the engine fires.
• Pre-Separation Air Filtration System - This time-saving technology boosts the efficiency of the engine’s filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
• Side-Access Chain Tensioner - The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Master Control Lever™ - The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Anti-Vibration System - STIHL® has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL® anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Toolless Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Throttle Trigger Lock - See it in action!

Specifications:

• Power Source: Gas
• Powerhead Weight: 12.3 lbs
• Recommended Guide Bar Length: 20 in
• Oilomatic® Chain: 3/8" RS3
• Chain Oil Capacity: 11 oz
• Engine Power: 4.6 bhp
• Fuel Capacity: 20.3 oz
• Displacement: 59.0 cc
• Intended Use: Professional

NOTES:

STIHL recommends #3624 (33 RS3 72) OILOMATIC® saw chain and 20" 3003 008 8921 Ematic™ guide bar combination. Compatible guide bar ranges: 16" to 25"